AE SERIES
INTERCONNECTION
THE FOLLOWING ARE PRINCIPLES OF INSTALLATION.
PLEASE NOTE: LOCAL, FEDERAL, OR NEC CODES PREVAIL OVER THESE SUGGESTIONS.
Abbreviations: |
|
|
GEN | = | Generator Assembly |
ATS | = | Automatic Transfer Switch |
Load Center | = | Customer's Normal Panel |
Emergency Load Center | = | Those circuits in a separate load box that will |
|
| be powered by the generator. |
Public Service | = | Normal Power Supplier |
GEN to ATS Wiring:
?3 wires for AC load (4 if three phase) sized for the generator's load amperage.
?A Ground wire is to connect all circuits (GEN, ATS, Load Centers) to the building's ground system.
?2 wires, 14 gauge twisted pair for GEN remote start signal.
GEN to ATS Optional:
?120
?12
Load center to ATS:
?3 wires for AC feed (four for three phase), sized for ATS rating.
?A ground wire is connected to all circuits (GEN, ATS, Load Centers) to the building's ground system.
ATS to emergency Load Center:
?3 wires for AC feed (four for three phase), sized for ATS rating.
?A ground wire is to connect all circuits (GEN, ATS, Load Centers) to the building's ground system.
Page 31 of 45