Normal Operation:
?Public Service power feeds the ATS which connects to the Emergency Load Center.
?When Public Service power fails, the ATS closes a contact causing GEN to start. Once AC power from generator is observed at the ATS, the ATS will switch the Emergency Load Center over to the GEN.
?When Public Service power returns, the ATS will switch the Emergency Load Center back to Public Service power and open engine start to contact (telling GEN to shut off).
CAUTIONS:
?Emergency load center loads must not exceed GEN's capacity.
?The ATS shall be protected by a circuit breaker appropriate for the ATS rating in the Customer Primary Load Center.
If you have any questions, contact Baldor Generators for technical support at
Page 32 of 45