Ariens 926057 warranty General Lubrication

Page 19

GENERAL LUBRICATION

(Figure 8)

1.Place unit into the service position (See Service Position on page 16).

IMPORTANT: Wipe each fitting clean before and after lubrication. DO NOT allow grease or oil to get on friction disc, friction plate or belts.

2.Apply Hi-Temp Grease or equivalent to the lubrication fittings after the first 16 hours of use and every 8 hours thereafter. See Service Parts on page 28.

3.Apply a few drops of oil to the roller chain at the beginning of the season or every 25 operating hours.

NOTE: Brush attachment gear case is lubricated at the factory and should not require additional lubrication.

4.Place unit into the operating position (See Operating Position on page 17).

Grease
Oil
Figure 8	OS0743
Figure 8

EN - 19

Image 19

Contents Power Brush Introduction Table of ContentsSafety Required Operator Training Safety Decals LocationsEmission Control System Safety RulesPage Page Check Function of Dual Handle Interlock AssemblyTools Required Unpacking Unit Unfold HandlebarCheck Function of all Controls Check Tire PressureCheck Engine Crankcase Oil Fill Engine Fuel TankControls and Features Standard Controls OperationBrush Height Adjustment Brush Angle AdjustmentAdd Fuel to Fuel Tank Filling Fuel Tank GasolineTo Stop in AN Emergency PRE-STARTStarting and Shut OFF Traveling Using the BrushTransport Service Position MaintenanceCheck Dual Handle Interlock Maintenance ScheduleMaintenance Schedule Operating PositionCheck Clutch Operation Check Clutch Cable AdjustmentClean Engine Clean Recoil Guard Foam CoverGeneral Lubrication Recoil Guard Foam Cover Installation Service and AdjustmentsSpeed Selector Adjustment Remove Attachment Cable Slack Attachment Clutch AdjustmentCheck Belt Finger Clearance Check Attachment Idler Arm Roller ClearanceAttachment Drive Belts Replacement Traction Drive Clutch AdjustmentTraction Drive Belt Replacement Install both wheel/tires Friction Disc ReplacementBrush Segment Replacement Joint Fuel System StorageShort Term Long TermService Parts TroubleshootingEngine SpecificationsSpecial Extensions Exceptions and Limitations Limitation of Remedy and Damages Page Ariens Company West Ryan Street Brillion, WI Fax