2. CAUTION!
Danger!
1
Be sure to engage the
traction drive clutch first. Engaging the attachment clutch before traction drive clutch can cause the unit to
2 travel backwards.
3. DANGER!
Danger!
Keep clear of brush while engine is running.
NEVER use your hands to clear blockages.
Operating on irregular terrain could cause the brush to dig in and drive the machine rearward.
Read Owner/Operator Manual.
Allow operation only by properly trained adult, never children.
4. HOT SURFACES!
DO NOT touch parts which are hot from operation. ALWAYS allow parts to cool.
5. DANGER!
Danger!
Always keep hands and feet away from all pinch points.
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include exhaust and evaporative emissions control system components required to meet U.S. Environmental Protection Agency (EPA) and/or California Air Resources Board (CARB) regulations. Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by an Ariens Company dealer or an authorized engine manufacturer's service center. Contact your Ariens Company Equipment Retailer concerning emission controls and component questions.
SAFETY RULES
Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly or operating. Failure to follow instructions could result in personal injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug before assembly, maintenance or service. Unintentional engine start up can cause death or serious injury.
Complete a walk around inspection of unit and work area to understand:
• Work area • Your unit • All safety decals ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.
EN - 5