Unigreen 16, 22, 11, 32 manual Key to the symbols

Page 5

1

2

3

4

5

7

8

9

10

11

13

14

15

16

17

19

20

21

22

23

6

12

18

24

Key to the symbols

1- Read the Use and Maintenance manual

2- Stop the machine and read the manual before every intervention

3- Don’t lubricate while running

4- Don’t drink

5- Don’t dispose of residue liquids in the environment 6- No smoking

7- Danger, risk or injury, don’t get near the machine until the moving machine members have stopped

8- Danger of crushing, don’t get your hands near the moving mechanical machine members

9- Danger, risk or injury caused by fluids under pressure

10- Don’t climb on the machine during work or transfers

11- Don’t climb on the tank

12- Don’t enter in the tank

13- Wearing earmuffs is obligatory

14- Wearing a face mask is obligatory

15- Wearing safety footwear is obligatory

16- Wearing protective gloves is obligatory

17- Wearing protective overalls is obligatory

18- Use a working pressure under that indicated in red on the manometer.

19- Don’t get your hands near the moving cardan shaft

20- Make sure power-takeoff of the tractor turns in the right direction and runs at the right speed.

21- Beware of the possibility of the raised boom falling

22- Danger of contact with the electric power lines

23- Don’t stand between the machine and the tractor 24- Danger of lateral skidding

2SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used:

Dangerous zones: any zone inside and/or near the machine where the presence of a person exposed constitutes a risk for the safety and health of the same person.

Person exposed: any person who has their body or any part of their body in a dangerous zone.

Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself.

Never start the machine until you have told anyone in the range of action of the machine to move away and they have done so.

The protective devices must not be removed or disabled when the machine is running.

It is obligatory to keep all the plates with danger and safety signs in perfect conditions. If they get damaged or deteriorate, replace them in good time. Replace parts believed to be faulty with others indicated by UNIGREEN. NEVER try makeshift or hazardous solutions.

Don’t wear clothes, jewellery, accessories, or anything else that can get caught in the moving machine members.

Pay the greatest attention to all the warning and danger signs on the machine.

Don’t use the machine for any other purpose other than that indicated in the manual.

The machine has been designed and built with the appropriate devices to guarantee the safety of the user.

In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictograms).

da 1 a 18

11+12

21+22

19+20

8+23+24

FIG.1

INDICATIVE POSITION

OF THE WARNING SIGNS ON THE SPRAYER NB: the position may vary on the basis of the characteristics of the model.

unigreen 5

Image 5
Contents 10/2007 USE and Maintenance ManualSummary Hand Lances Hose Reel Maintenance Composition of the Manual GuaranteeImproper use Product Responsibility Unigreen spa is not responsible ifKey to the symbols Intended USE Using Chemical ProductsProhibited USE RecommendationsCharacteristics and Specifications Machines Designed to be Used only with Clean WaterWeather Conditions Driving on the RoadUSER’S Instructions Description of the Machine Noise Level of the MachineStandards of Reference Hand Washing Tanks Work StationsPreliminary Checks Transporting and Moving the MachineStandard Version Elevator Coupling Towed Sprayers ParkingTractor Coupling Parking Foot Wheel Spacing AdjustmentHook Version Homologated Cardan Shaft Hydraulic Connection to the DistributorsSuction Filter PumpComponents of the Pressure Regulator Pressure RegulatorControl box for Ergo and Remo electrical regulators General InstructionsSpraying Computer Optional Mixing Filling the TankManual Premixing Premixer on Cover OptionalPremixer on Hopper with TIN Washer Optional TOP-Mix S41HOW to USE the LP83 Incorporator Washing with Full Tank Optional Washing the SprayerCircuit Washer and Tank Washer Hydraulic Herbicide Booms Horizontal Booms for Herbacious CultivationsExceed a height of 4 meters Indipendent Hydraulic PlantVariable Geometry AIR-ASSISTED BoomsSELF-LEVELING Devices Distrubution with Herbicide Boom LiftingDescription of Type of Jets Description of Type of Nozzles=600xQ Useful InformationHose Reel MarkerHand Lances Programmed Maintenance TAB. N MaintenanceRoutine Maintenance Extraordinary MaintenanceDemolition and Disposal Putting Back Into Service After Winter LayupMaterials for Demolition Electrical and Electronic Apparatus Waste EeawUnigreen Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso RED TAB.1 Characteristics Nozzles ISORosso RED Marrone Brown TAB.2 Characteristics Nozzles Conical ISOTAB.3-4 Capacity Hand Lances TAB.5-6 Spraying Tables 250050 h 300 h Table of Programmed Maintenance OperationPROBLEMS, Causes and Solutions TAB a TAB.12A Allowed FittingsTAB.12B Allowed Fittings TAB bIlpolietilene Rotazionale Member of the group