Unigreen 32, 22, 16, 11 manual Useful Information, =600xQ

Page 23

To meet particular requirements UNIGREEN can supply booms with different spaces between the nozzles and setups suitable for running at pressures over 20 bar.

See the table below for the data conversion.

OTHER SPACING (Cm)	75	60	50	45	42,5	40	35	33	30

CONVERSION FACTOR	0,666	0,833	1,000	1,111	1,176	1,250	1,428	1,515	1,666

USEFUL INFORMATION

During the distribution of the product watch the pre-established speed and pressure, following the data in the nozzles table.

The tables indicate the volume distributed per hectare for each type of nozzle at the desired speed and pressure and are calculated as follows:

V=600xQ / IxV	where: V=volume to distribute (L/HA)
	Q=capacity of the nozzle (L/MIN)
	I=distance between the nozzles in metres (0.5)
	V = tractor speed (Km/h)

e)Considering the wear of the nozzles and a possible pressure drop in time, to check them proceed as follows:

With the pump running at the pre-established pressure, measure the quantity of liquid that comes out of the nozzles in L/min. Multiply this by the figure in the table indicated below corresponding to the chosen treatment speed. The resulting figure is the exact quantity of liquid to distribute per hectare.

THIS GOES FOR	Km / hour	2	3	4	5	6	7	8	9	10	11	12
A DISTANCE
A DISTANCE		600	400	300	240	200	172	150	133	120	109	100
BETWWEN THE	VALUE	600	400	300	240	200	172	150	133	120	109	100
NOZZLESOF0.5m

EXAMPLE: the nozzle delivers 2.2 L. per minute. The speed chosen for the treatment is 6 km/h, the quantity to distribute per hectare is

2.2 x 200 = 440 L/ha

f ) For a quick and immediate spraying check use QUICK CHEK (code 5030/ 0174F )

unigreen 23

Image 23

Contents 10/2007 USE and Maintenance ManualSummary Hand Lances Hose Reel Maintenance Product Responsibility Unigreen spa is not responsible if GuaranteeComposition of the Manual Improper useKey to the symbols Recommendations Using Chemical ProductsIntended USE Prohibited USEDriving on the Road Machines Designed to be Used only with Clean WaterCharacteristics and Specifications Weather ConditionsUSER’S Instructions Description of the Machine Noise Level of the MachineStandards of Reference Transporting and Moving the Machine Work StationsHand Washing Tanks Preliminary ChecksStandard Version Elevator Coupling Towed Sprayers ParkingTractor Coupling Parking Foot Wheel Spacing AdjustmentHook Version Homologated Cardan Shaft Hydraulic Connection to the DistributorsSuction Filter PumpGeneral Instructions Pressure RegulatorComponents of the Pressure Regulator Control box for Ergo and Remo electrical regulatorsSpraying Computer Optional Premixer on Cover Optional Filling the TankMixing Manual PremixingPremixer on Hopper with TIN Washer Optional TOP-Mix S41HOW to USE the LP83 Incorporator Washing with Full Tank Optional Washing the SprayerCircuit Washer and Tank Washer Indipendent Hydraulic Plant Horizontal Booms for Herbacious CultivationsHydraulic Herbicide Booms Exceed a height of 4 metersVariable Geometry AIR-ASSISTED BoomsSELF-LEVELING Devices Description of Type of Nozzles LiftingDistrubution with Herbicide Boom Description of Type of Jets=600xQ Useful InformationHose Reel MarkerHand Lances Extraordinary Maintenance MaintenanceProgrammed Maintenance TAB. N Routine MaintenanceElectrical and Electronic Apparatus Waste Eeaw Putting Back Into Service After Winter LayupDemolition and Disposal Materials for DemolitionUnigreen Arancio Orange Verde Green Giallo Yellow BLU Blue Rosso RED TAB.1 Characteristics Nozzles ISORosso RED Marrone Brown TAB.2 Characteristics Nozzles Conical ISOTAB.3-4 Capacity Hand Lances TAB.5-6 Spraying Tables 250050 h 300 h Table of Programmed Maintenance OperationPROBLEMS, Causes and Solutions TAB a TAB.12A Allowed FittingsTAB.12B Allowed Fittings TAB bIlpolietilene Rotazionale Member of the group