OPERATING THE SPREADER
ON/OFF Control (Late Style) | Stopping the Motor |
ON
OFF
BLAST
| SPINNER |
On/Off Control Switch | Spinner Indicator Light |
Used to start and stop | Illuminated light Indicates |
the spinner. | power to the motor. |
(Emergency |
|
Starting the Motor
WARNING
Before starting the spreader, the driver shall verify all bystanders are a minimum of 25 feet away from operating spreader.
1.Set the power switch to the ON position to start the motor. The motor will start immediately. The power switch will remain in this position.
Blast Position
Move and hold the power switch to the BLAST position for as long as momentary operation is needed. When released, the switch will automatically return to the OFF position and stop the motor.
1.Set the power switch to the OFF position to stop the motor. The power switch will remain in this position. The power switch OFF position operates as emergency stop when required.
NOTE: Always place the cover on the hopper to prevent moisture buildup. Do not let the spreader sit idle with material in the hopper for an extended period of time. This can cause the material to compact and reduce or stop the flow of material.
CAUTION
Do not swing spreader with material in the hopper.
NOTE: The truck ignition must be on to start the spreader.
NOTE: If the truck ignition is turned off while the spreader is running, the motor will stop.
Lit. No. 94430/94431 | 11 | April 1, 2005 |