Fisher 2000-(20364), 1000-(10003) owner manual Located on both sides of receiver mount only

Page 7

SAFETY INFORMATION

Warning Label

WARNING

DO NOT EXCEED HITCH MANUFACTURER RATINGS.

DO NOT EXCEED GVWR OR GAWR WITH SPREADER AND LOAD.

94426

Warning Label

located on both sides of receiver mount only.

Warning/Caution Label

Located on both sides

Warning/Caution Label

WARNING CAUTION

•DO NOT EXCEED GVWR OR GAWR WITH SPREADER AND LOAD.

•TURN SPREADER OFF BEFORE FILLING, ADJUSTING, OR CLEANING.

•BYSTANDERS TO STAY A MINIMUM OF 25 FEET AWAY FROM OPERATING SPREADER.

•DO NOT CLIMB INTO OR RIDE ON SPREADER.

•KEEP HANDS, FEET, CLOTHING AWAY FROM MOVING CONVEYOR AND SPINNER.

•READ OWNER'S MANUAL BEFORE OPERATING OR SERVICING SPREADER.

•EMPTY AND CLEAN SPREADER AFTER EACH USE.

68584

Lit. No. 94430/94431

5

April 1, 2005

Image 7

Contents April 1 Lit. No Read this manual before installing or operating the spreaderTable of Contents Lit. No /94431 April 1 PrefaceBefore You Begin Safety InformationMetric Grade 8.8 Ft.-Lb Torque ChartDo not Swing Spreader With Material in the Hopper Located on both sides of receiver mount only Loading Approximate Material WeightsCertification Fixed Mount Spreader Mounting the SpreaderReceiver Mount Spreader Swing Away SpreaderOperating the Spreader Accessory CircuitDriving and Spreading on Snow and Ice Starting and Stopping the Motor PowerresetSpreader Control ON/OFF Control Early StyleStarting the Motor ON/OFF Control Late Style Stopping the MotorBlast Position Emergency Stop OFF Position Variable Speed PWM ControlStarting the Motor with Variable Speed PWM Control Stopping the Motor with Variable Speed PWM ControlRemoving the Spreader Preseason Check MaintenanceCleaning Postseason MaintenanceRecycle Drive Belt ReplacementBearing and Set Screw Maintenance Vehicle Spreader Wiring Harness PIN Harness Wiring DiagramChmsl No Adapter Required BatteryVehicle Side Wiring Harness Spreader Side Early StyleProblem Possible Cause Suggested Solution TroubleshootingON/OFF Control Problem Possible Cause Suggested Soulution Mechanical Problems Variable Speed PWM and ON/OFF ControlEarly Production 2 Pin Harness Division of Douglas DYNAMICS, L.L.C