Fisher 1000-(10003), 2000-(20364) owner manual Do not Swing Spreader With Material in the Hopper

Page 6

SAFETY INFORMATION

Please become familiar with the Warning and Caution Labels on the spreader!

Caution Label

CAUTION

DO NOT SWING SPREADER

WITH MATERIAL IN THE HOPPER

P2110

Caution Label

Located on both sides

SWING AWAY® mount only

CA	UT	ION
CA

WARNING

CAUTION

Warning/Caution Label

Located on both sides

Warning/Caution Label

WARNING CAUTION

•DO NOT EXCEED GVWR OR GAWR WITH SPREADER AND LOAD.

•TURN SPREADER OFF BEFORE FILLING, ADJUSTING, OR CLEANING.

•BYSTANDERS TO STAY A MINIMUM OF 25 FEET AWAY FROM OPERATING SPREADER.

•DO NOT CLIMB INTO OR RIDE ON SPREADER.

•KEEP HANDS, FEET, CLOTHING AWAY FROM MOVING CONVEYOR AND SPINNER.

•READ OWNER'S MANUAL BEFORE OPERATING OR SERVICING SPREADER.

•EMPTY AND CLEAN SPREADER AFTER EACH USE.

68584

April 1, 2005

4

Lit. No. 94430/94431

Image 6

Contents Read this manual before installing or operating the spreader April 1 Lit. NoTable of Contents Preface Lit. No /94431 April 1Safety Information Before You BeginTorque Chart Metric Grade 8.8 Ft.-LbDo not Swing Spreader With Material in the Hopper Located on both sides of receiver mount only Approximate Material Weights LoadingCertification Mounting the Spreader Fixed Mount SpreaderSwing Away Spreader Receiver Mount SpreaderAccessory Circuit Operating the SpreaderDriving and Spreading on Snow and Ice ON/OFF Control Early Style PowerresetSpreader Control Starting and Stopping the MotorON/OFF Control Late Style Stopping the Motor Starting the MotorBlast Position Stopping the Motor with Variable Speed PWM Control Variable Speed PWM ControlStarting the Motor with Variable Speed PWM Control Emergency Stop OFF PositionRemoving the Spreader Postseason Maintenance MaintenanceCleaning Preseason CheckDrive Belt Replacement RecycleBearing and Set Screw Maintenance PIN Harness Wiring Diagram Vehicle Spreader Wiring HarnessChmsl Early Style BatteryVehicle Side Wiring Harness Spreader Side No Adapter RequiredTroubleshooting Problem Possible Cause Suggested SolutionON/OFF Control Mechanical Problems Variable Speed PWM and ON/OFF Control Problem Possible Cause Suggested SoulutionEarly Production 2 Pin Harness Division of Douglas DYNAMICS, L.L.C