MOUNTING THE SPREADER
Fixed Mount Spreader
CAUTION
During removal or mounting, securely grip spreader to avoid dropping.
NOTE: The spreader shall be installed according to instructions supplied. Your local outlet is trained to provide this service and service your spreader with factory original parts.
1.Install the left and right top brackets to the truck bed rail with one 1/2" cap screw, one 1/2" flat washer and one 1/2" locknut. Attach the other hole in the top bracket to the bed rail with one 1/2" cap screw and one 1/2" locknut.
2.Place the spreader on the bumper and line up the holes in the bottom feet with the holes in the bumper.
3.Attach the spreader to the top brackets using two 3/8" cap screws and two 3/8" locknuts per side.
4.Attach the spreader to the bumper of the truck using one 3/8" cap screw, one 3/8" flat washer and one 3/8" locknut per side.
5.Plug the spreader harness into the vehicle harness.
Lit. No. 94430/94431 | 7 | April 1, 2005 |