Swim'n Play Above Ground Swimming Pool warranty Protect Your Liner, Assemble Buttress

PROTECT YOUR LINER

7

Once the wall is closed and

WALL

screws and nuts are tightened SEAM securely, cover the screw heads

on the inside of the pool with a cloth tape all the way from top to bottom of wall. If the filter inlet and outlet are not used, tape over the prescored areas on the inside of the pool wall.

Cloth tape or duct tape is available through your local pool dealer or hardware store.

		SKIMMER
		INLET FITTING
	VIEW FROM		SKIMMER
			RETURN
INSIDE OF POOL			FITTING

CLOTH TAPE

OR DUCT TAPE

ASSEMBLE BUTTRESS 8

Pre-assemble a Cage Nut into the Buttress Top Plates (Note: Cage nuts not needed on all pools). Refer to Step #14 for instructions. Assemble buttresses and buttress braces to the bottom strap assemblies as illustrated using all necessary hardware. Tighten securely.

If fencing or decking is to be installed, refer to the deck and fence instructions before assembly.

If your pool is equipped with feature strips it is best to apply them to the buttresses at this time.

			BUTTRESS
			TOP PLATE
	#12 x 1/2”
	SHEET METAL			#12 x 1/2”
	SCREWS
				SHEET METAL
				SCREWS
	BUTTRESS			5/16”-18 x 1/2”
	BRACE BRACKET
				HEX HEAD
1/4”-20	5/16”-18			BOLTS
HEX NUTS	HEX NUTS
			BUTTRESS
BUTTRESS				POST
BRACE
1/4”-20			1/4”-20 x 2 3/4”
HEX NUTS
			TRUSS HEAD
	5/16”-18		SCREWS
	HEX NUT
BUTTRESS
BRACE BRACKET
				5/16”-18 x 3”
	1/4”-20 x 2 3/4”	BUTTRESS		HEX HEAD BOLT
STRAP	TRUSS HEAD	BOTTOM PLATE
	SCREWS

#12 X 1/2”	5/16” - 18 x 1/2”	5/16” - 18	5/16” - 18 x 3”	1/4” - 20 X 2 3/4”	1/4” - 20
SHEET METAL	HEX HEAD		HEX HEAD	TRUSS HEAD
SCREW	BOLT	HEX NUT	BOLT	SCREW	HEX NUT

12