Swim'n Play Above Ground Swimming Pool warranty Installing TOP Covers, Deluxe TOP Covers

Page 21

INSTALLING TOP COVERS

FOLLOW THE INSTRUCTIONS BELOW

FOR THE COVERS FOR YOUR PARTICULAR POOL

4", 6" & 7" DELUXE TOP COVERS

These covers don’t require cage nuts or top cover screws.

For pools with the new 1-piece deluxe top covers, simply snap the cover into place, aligning the tab on the bottom of the cover with the slot in the top plate of pool (fig.A only.)

For 2-piece covers, insert bottom section into top (fig. 1) so that it becomes one unit (fig. 2). Then snap cover into place aligning tab on bottom of cover with slot in the top plate of pool (fig. 3) and secure with a #10 x 1" screw (fig. 4).

1

2

3

17

A

4

#10X1” SELF

TAPPING SCREW

IMPORTANT: Make sure that the inside edge of the top cover is securely positioned over the edge of the ledges

21

Image 21

Contents Oval Pool Contract Installations Some Friends To Help OUT IntroductionInstallation Assembly Steps Aluminum Pools Vertical Preparing the Ground Actual Pool Dimensions Clearance SizeNail Center Stake Clearance Radius Leveling the GroundSizes Assembling the Bottom StrapsExample of Basic Layout Bottom Rail and Strap LayoutBottom Rail Bottom Plate Patio Block Ground Shield Wall Guard are OptionalClosing the Wall Insert Wall Into Bottom RailsScrew Serrated Flange NUTAssemble Buttress Protect Your LinerHold Down Sheet Rechecking Your WorkTHRU-THE-WALL Skimmer OnlyEarth Mound Earth MoundLiner Liner InstallationCorrect IncorrectCove EZ Hook Liner InstallationPRE-ASSEMBLY of TOP Plates VERTICALS, TOP Plates and RailsVertical Buttress Rail Placement of Warning Labels Installing Ledges7 Deluxe TOP Covers Installing TOP CoversTOP Cover Ledge Inside Cover 9 TWO-PIECE Wrap around Cover PedestalPool User Warning Labels Safety Brochures and Education ProgramsSafety Tips Rules and Regulations Life Saving Equipment Preventative Maintenance TipsWinter Care Care of Pool WaterANY Objects That MAY Provide Access to the Pool Regina Avenue