ViewSonic PJ656 manual Easy Menu

Multifunctional settings

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

Item		Description
ASPECT		Using the buttons ◄/► switches the mode for aspect ratio.
		See the ASPECT item in the IMAGE menu.
KEYSTONE		Using the buttons ◄/► corrects the keystone distortion.
		See the item KEYSTONE of section SETUP menu.
		Using the buttons ◄/► switches the mode of picture type. The
		modes of picture type are combinations of a mode of GAMMA and
		a mode of COLOR TEMP. Choose a suitable mode according to the
		projected source.
		NORMAL  CINEMA  DYNAMIC
MODE		NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
		CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
		DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
		• When the combination of GAMMA and COLOR TEMP differs from
		pre-assigned modes above, the display on the menu for the MODE
		is “CUSTOM”. Please refer to the GAMMA and COLOR TEMP
		items in the PICTURE menu.
		• When this function is performed, a certain extra such as a line may appear.
BRIGHTNESS		Using the buttons ◄/► adjusts the brightness.
		See the item BRIGHTNESS in the PICTURE menu.
CONTRAST		Using the buttons ◄/► adjusts the contrast.
		See the item CONTRAST of section PICTURE menu.
COLOR		Using the buttons ◄/► adjusts the strength of whole color.
		See the COLOR item in the PICTURE menu.
TINT		Using the buttons ◄/► adjusts the tint.
		See the TINT item in the PICTURE menu.
		Using the buttons ◄/► adjusts the sharpness.
SHRPNESS		See the SHARPNESS item in the PICTURE menu.
		• There may be some noise when an adjustment is made. This is
		not a malfunction.
WHISPER		Using the buttons ◄/► turns off/on the whisper mode.
		See the WHISPER item in the SETUP menu.
ViewSonic	PJ656		25