ViewSonic PJ656 manual Image Menu, Size, Auto Adjust, Execute

Multifunctional settings

IMAGE Menu (continued)

Item	Description
	Using the buttons ▲/▼ adjusts the horizontal size.
	Large  Small
H SIZE	• This item can be selected only for an RGB signal.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment
	by pressing the RESET button on the remote control during this
	operation.
	Selecting this item performs the automatic adjustment feature.
	For an RGB signal
	The vertical position, the horizontal position, the clock phase and
	the horizontal size will be automatically adjusted. And the aspect
	ratio will be automatically selected.
	Make sure that the application window is set to its maximum size
	prior to attempting to use this feature. A dark picture may still be
	incorrectly adjusted. Use a bright picture when adjusting.
	For a video signal or s-video signal
	The video format best suited for the respective input signal will be
AUTO ADJUST	selected automatically.
	This function is available only when the AUTO mode is selected to
EXECUTE	the VIDEO FORMAT item in the INPUT menu. For a component
	video signal, the signal type is identified automatically independently
	of this function.
	For a video signal, s-video signal or component video signal
	The vertical position and horizontal position will be automatically
	adjusted.
	For a component video signal
	The aspect ratio will be automatically selected.
	The clock phase will be automatically adjusted.
	• The automatic adjustment operation requires approximately 10
	seconds. Also please note that it may not function correctly with
	some input.

ViewSonic PJ656 31