ViewSonic PJ656 Whisper function is working, Lamp is approaching the end of its product Lifetime

Page 54

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

25

dark.

Select NORMAL for the WHISPER item in the SETUP

 

menu.

 

 

The lamp is approaching the end of its product

40, 41

 

lifetime.

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

44

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

ViewSonic

PJ656

50

Image 54
Contents ViewSonic Compliance Information Important Safety Instructions Copyright Information Product Registration For Your RecordsContents of package About this manualContent About contents of package Fastening the lens cover Part names ProjectorComponent CB/PB CR/PRRemote control Control buttonsSetting up Arrangement At 4 3 ScreenAt 16 9 Screen Adjusting the projectors elevator Using the Security Bar How to attachConnecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Examples of connection with a VCR/DVD player P B P RConnecting power supply Remote control Putting batteriesUsing the remote control Turning off the power Power on/offTurning on the power STANDBY/ON PowerOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus  For a video signal/no signal 43  169  Small For an RGB signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Easy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Mirror ResetEasy Menu Filter TimePicture Menu GammaColor Temp Picture MenuHigh  Middle  LOW  Custom SecamLOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionSize Auto AdjustImage Menu ExecuteComponent Input MenuColor Space Video FormatInput Menu InformationSetup Menu VolumeAudio OSD Bright Screen MenuMenu Position Bright  DarkScreen Menu Start UPMyScreen Lock No Input is Detected MessageSync is OUT of Range Auto Search Reset  CancelOption Menu Auto OFFOption Menu Maintenance LampCase of replacement by yourself LampLamp part number = RLC-013 Air filter Air filtre PJ656 Related messages There is no input signalInternal temperature is rising Is out of the response parameter range of this unitRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the air filter There is a possibility that the interior portionSignal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workAudio setting is not correct Signal cables are not correctly connectedVolume is adjusted to an extremely low level Color settings are not correctly adjustedWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeAudio input Communication port SpecificationRGB input Video input Audio outputSpecifications Customer Support Country Web Site =Telephone Mail Region =FaxLimited Warranty ViewSonic Projector What the warranty covers