ViewSonic PJ656 manual Setup Menu, Volume, Audio

Multifunctional settings

SETUP Menu

With the SETUP menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]	:SELECT
PICTURE	KEYSTONE     +0
IMAGE	WHISPER      NORMAL
INPUT	MIRROR       NORMAL
SETUP	VOLUME       16
SCREEN	AUDIO
OPTION
EASY MENU

Item

Description

Using the buttons ▲/▼ corrects the keystone distortion.

Upper in the data  Lower in the data

•The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.

KEYSTONE	• When the V:INVERT or the H&V:INVERT is selected under the
	item MIRROR, if the projector screen is inclined or if the projector is
	angled downward, this function may not work correctly.

•When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible.

Using the buttons ▲/▼ turns off/on the whisper mode.

WHISPER	NORMAL  WHISPER
	• When the WHISPER is selected, acoustic noise and screen
	brightness are reduced.

Using the buttons ▲/▼ switches the mode for mirror status.

MIRROR

NORMAL  H:INVERT  V:INVERT  H&V:INVERT

VOLUME	Using the buttons ▲/▼ adjusts the volume.
	High  Low

	Choose an input port using the buttons ▲/▼	AUDIO
	(1), then select the audio port to be interlocked	QUIT
	with the input port using the buttons ◄/► (2).		1   2
		RGB1
AUDIO	When off is selected, both of two audio ports	RGB2
	do not work for the input port.	S‑VIDEO
		COMPONENT
		VIDEO

(1)RGB1  RGB2  COMPONENT  S-VIDEO  VIDEO

(2)1  2 

ViewSonic PJ656 34