ViewSonic PJ656 manual Air ﬁlter

Page 46

Maintenance

Air ﬁlter

WARNING ►Before handling the projector, ensure the power switch is off and the power cable is not plugged in. Then, allow the projector to sufﬁciently cool. Handling while the projector while hot could cause an electric shock, a burn and/or malfunction to the projector.

►Only use the speciﬁed air ﬁlter. Do not use the projector with the air ﬁlter and the ﬁlter cover removed. It could result in a ﬁre and/or malfunction to the projector.

►The air ﬁlter should be cleaned periodically. If the air ﬁlter becomes clogged by dust or the like, internal temperatures rise and could cause a ﬁre, a burn and/or malfunction to the projector.

NOTE • Please replace the air ﬁlter when it is damaged or too soiled, and also when you replace the lamp.

•For a suitable indication about the air ﬁlter, please reset the ﬁlter time only when you have cleaned or replaced the air ﬁlter.

•The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent a internal heat level rising.

If the air ﬁlter becomes clogged by dust or the like, internal temperatures rise and could cause a ﬁre, a burn and/or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible.

Please check and clean the air filter periodically, even if there is no message. Please replace the air ﬁlter when it is damaged or too soiled. Preparation of a new air ﬁlter is recommended.

To obtain a new air ﬁlter, please contact ViewSonic for the air ﬁlter part number.

When you replace the lamp, please replace the air ﬁlter. An air ﬁlter of speciﬁed type will come together with a replacement lamp for this projector.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at

least 45 minutes.

2. When the projector is suspended from the ceiling, apply the vacuum cleaner to

and around the ﬁlter cover ﬁrst, to prevent penetration of dust or the like.

3. While supporting the projector with one hand, use your other hand to pull the ﬁlter

cover forward in the direction of the arrow. Remove the air ﬁlter.

Handle

Filter cover

ViewSonic

PJ656

42

Image 46

Contents ViewSonic Compliance Information Important Safety Instructions Copyright Information Product Registration For Your RecordsContents of package About this manualContent About contents of package Fastening the lens cover Part names ProjectorComponent CB/PB CR/PRRemote control Control buttonsSetting up At 4 3 Screen ArrangementAt 16 9 Screen Adjusting the projectors elevator Using the Security Bar How to attachConnecting your devices About Plug-and-Play capabilityConnecting to a speaker with ampliﬁer output Connecting to a monitor outputExamples of connection with a computer Examples of connection with a VCR/DVD player P B P RConnecting power supply Remote control Putting batteriesUsing the remote control Turning off the power Power on/offTurning on the power STANDBY/ON PowerOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus  For a video signal/no signal 43  169  Small For an RGB signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Easy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Mirror ResetEasy Menu Filter TimePicture Menu GammaColor Temp Picture MenuHigh  Middle  LOW  Custom SecamLOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionSize Auto AdjustImage Menu ExecuteComponent Input MenuColor Space Video FormatInput Menu InformationVolume Setup MenuAudio OSD Bright Screen MenuMenu Position Bright  DarkStart UP Screen MenuMyScreen Lock Message No Input is DetectedSync is OUT of Range Auto Search Reset  CancelOption Menu Auto OFFOption Menu Maintenance LampLamp Case of replacement by yourselfLamp part number = RLC-013 Air ﬁlter Air ﬁltre PJ656 Related messages There is no input signalInternal temperature is rising Is out of the response parameter range of this unitRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the air ﬁlter There is a possibility that the interior portionSignal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workAudio setting is not correct Signal cables are not correctly connectedVolume is adjusted to an extremely low level Color settings are not correctly adjustedWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeAudio input Communication port SpeciﬁcationRGB input Video input Audio outputSpeciﬁcations Customer Support Country Web Site =Telephone Mail Region =FaxLimited Warranty ViewSonic Projector What the warranty covers