ViewSonic VS12602 manual Configuring the display, Brightness control, Setting up the PC

Page 24

Configuring the display

Setting up the PC

Configuring the display

You may press the Auto-adjustbutton to automatically optimize and adjust the screen settings while displaying video source from the D-sub input jack.

Brightness control

To adjust the brightness level of the monitor, press the Brightness/Increase button to display the Brightness indicator, and then press the same button to increase the level or press the Decrease button to decrease the level.

ViewSonic VPC101

17

Image 24

Contents ViewSonic VPC101 All-in-One PCModel No. VS12602 Compliance Information For U.S.AFor Canada CE Conformity for European CountriesETSI EN 300 328V1.7.1 EN 301 489-01 V1.6.1 EN Important Safety Instructions Declaration of RoHS Compliance Copyright Information U.S. Patent NumbersProduct Registration For Your RecordsTable of contents Using the webcam Running ViewSonic Recovery Manager Running Recovery Disc Creation ToolUsing the recovery DVD Frequently asked questions FAQOverview of your documentation Document typeTypographics Printed documentationPackage contents Standard itemsGetting to know the PC Touring the PCFront view DescriptionGetting to know the PC Rear viewYou can adjust the back computer stand to enable it to stand Right-side view Wired keyboard and mouse Left-side viewSpecial keyboard buttons front view Function key Performed taskIndicator lights Overview of the wired mouse front viewActivities Setting up the PC Preparing to setup your PCSetting up the PC Connecting the powerConnecting the wired keyboard and mouse Customizing the mouse settingsTurning on the PC Turning off the PCConfiguring the display Brightness controlUsing the PC Connecting to the InternetConnecting to a wired network Using the PC Connecting to a wireless network for select modelsUsing the webcam Using the optical disc drive Inserting a discMedia Type Read2. Gently pull out the disc tray 4. Gently push the disc tray back into the disk slotReading a disc Writing to a discRemoving a disc Using memory cards Your system will automatically detect the inserted memory card and then display the content of the memory card Using the touch screen for select models Selecting items with your touch screenUsing the Peripheral Devices Connecting USB devicesUsing the Peripheral Devices Removing USB devicesCleaning and care Cleaning the screen and computerScreen and computer Cleaning and care CDs and DVDs ViewSonic Wizard CD and System Recovery and Driver DiskCleaning the discs Storing your computerCleaning your keyboard and mouse Keyboard and mouseBIOS Setup Utility When to Use the BIOS Setup UtilityBIOS Setup Utility AreaDescriptions Standard CMOS Features menu Advanced BIOS Features menuMenu Load Optimized Defaults menu To select a boot device manually, press F9when the ViewSonic logo appears on the screen during system startup. The Boot MenuSet Password menu Save & Exit Setup menuExit Without Saving menu System Recovery When to Use System RecoveryRunning ViewSonic Recovery Manager System Recovery System recovery is initiated and the following screen appears4. Click OK 5. Another confirmation message appears, as below. Click OK7. After the system has been restored, the following window appears 8. Click OK to restart your All-in-One PCRestarting may take several seconds to finish Running Recovery Disc Creation Tool 5. Click YES 6. Insert a blank disc when prompted to do so, and then click YES 10. Store the recovery disc in a safe place for future use7. Click OK to continue Using the recovery DVD System Recovery Troubleshooting Frequently asked questions FAQPower problems Troubleshooting Internet access problemsOptical discs problems Display problems Keyboard and mouse problems Sound and microphone problems Miscellaneous problems Specifications ModelVPC101 Specifications Other information Customer SupportYou will need the product serial number Country/RegionLimited Warranty Other information2. Any other damages, whether incidental, consequential or otherwise