ViewSonic VS12602 manual Important Safety Instructions

Page 4

Important Safety Instructions

1.Read these instructions completely before using the equipment.

2.Keep these instructions in a safe place.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6.Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions.

7.Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

9.Do not attempt to circumvent the safety provisions of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, consult an electrician for replacement of the outlet.

10.Protect the power cord from being tread upon or pinched, particularly at the plug, and the point where if emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use caution when moving the cart/equipment combination to avoid injury from tipping over.

13.Unplug this equipment when it will be unused for long periods of time.

14.Refer all servicing to qualified service personnel. Service is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed

to rain or moisture, or if the unit does not operate normally or has been dropped.

ViewSonic VPC101

iii

Image 4

Contents VPC101 All-in-One PC ViewSonicModel No. VS12602 Compliance Information For U.S.AFor Canada CE Conformity for European CountriesETSI EN 300 328V1.7.1 EN 301 489-01 V1.6.1 EN Important Safety Instructions Declaration of RoHS Compliance Copyright Information U.S. Patent NumbersProduct Registration For Your RecordsTable of contents Using the webcam Running ViewSonic Recovery Manager Running Recovery Disc Creation ToolUsing the recovery DVD Frequently asked questions FAQOverview of your documentation Document typeTypographics Printed documentationPackage contents Standard itemsGetting to know the PC Touring the PCFront view DescriptionGetting to know the PC Rear viewYou can adjust the back computer stand to enable it to stand Right-side view Left-side view Wired keyboard and mouseSpecial keyboard buttons front view Function key Performed taskOverview of the wired mouse front view Indicator lightsActivities Setting up the PC Preparing to setup your PCSetting up the PC Connecting the powerConnecting the wired keyboard and mouse Customizing the mouse settingsTurning on the PC Turning off the PCConfiguring the display Brightness controlConnecting to the Internet Using the PCConnecting to a wired network Using the PC Connecting to a wireless network for select modelsUsing the webcam Using the optical disc drive Inserting a discMedia Type Read2. Gently pull out the disc tray 4. Gently push the disc tray back into the disk slotWriting to a disc Reading a discRemoving a disc Using memory cards Your system will automatically detect the inserted memory card and then display the content of the memory card Using the touch screen for select models Selecting items with your touch screenUsing the Peripheral Devices Connecting USB devicesUsing the Peripheral Devices Removing USB devicesCleaning the screen and computer Cleaning and careScreen and computer Cleaning and care CDs and DVDs ViewSonic Wizard CD and System Recovery and Driver DiskCleaning the discs Storing your computerCleaning your keyboard and mouse Keyboard and mouseBIOS Setup Utility When to Use the BIOS Setup UtilityArea BIOS Setup UtilityDescriptions Advanced BIOS Features menu Standard CMOS Features menuMenu Load Optimized Defaults menu To select a boot device manually, press F9when the ViewSonic logo appears on the screen during system startup. The Boot MenuSave & Exit Setup menu Set Password menuExit Without Saving menu When to Use System Recovery System RecoveryRunning ViewSonic Recovery Manager System Recovery System recovery is initiated and the following screen appears4. Click OK 5. Another confirmation message appears, as below. Click OK8. Click OK to restart your All-in-One PC 7. After the system has been restored, the following window appearsRestarting may take several seconds to finish Running Recovery Disc Creation Tool 5. Click YES 10. Store the recovery disc in a safe place for future use 6. Insert a blank disc when prompted to do so, and then click YES7. Click OK to continue Using the recovery DVD ViewSonic VPC101 Frequently asked questions FAQ TroubleshootingPower problems Troubleshooting Internet access problemsOptical discs problems Display problems Keyboard and mouse problems Sound and microphone problems Miscellaneous problems Model SpecificationsVPC101 Specifications Other information Customer SupportYou will need the product serial number Country/RegionLimited Warranty Other information2. Any other damages, whether incidental, consequential or otherwise