ViewSonic VS12602 manual Keyboard and mouse, Cleaning your keyboard and mouse, Cleaning and care

Page 38

Cleaning and care

Keyboard and mouse

Cleaning your keyboard and mouse

Before starting to clean the keyboard or mouse, unplug the USB cable to disconnect the keyboard from the computer. To properly disconnect the USB cable, see Removing USB devices.

1.For wireless keyboard or mouse only, if your keyboard or mouse has a power button, turn it off.

2.For wireless keyboard or mouse only, remove installed batteries from the battery compartment.

3.For the keyboard, use a can of compressed air (purchased separately) to blow away any dust between the keys on the keyboard. You may even turn the keyboard upside to remove the dust trapped between the keys.

4.Use a soft lint-free cloth moistened with some water to wipe the keys and chassis of your keyboard or mouse. Do not allow water to seep into the internal components of keyboard or mouse.

5.Before reassembling and reconnecting the keyboard or mouse, ensure they are completely dry.

ViewSonic VPC101

31

Image 38

Contents Model No. VS12602 ViewSonicVPC101 All-in-One PC For Canada Compliance InformationFor U.S.A CE Conformity for European CountriesETSI EN 300 328V1.7.1 EN 301 489-01 V1.6.1 EN Important Safety Instructions Declaration of RoHS Compliance Copyright Information U.S. Patent NumbersProduct Registration For Your RecordsTable of contents Using the webcam Using the recovery DVD Running ViewSonic Recovery ManagerRunning Recovery Disc Creation Tool Frequently asked questions FAQTypographics Overview of your documentationDocument type Printed documentationPackage contents Standard itemsFront view Getting to know the PCTouring the PC DescriptionGetting to know the PC Rear viewYou can adjust the back computer stand to enable it to stand Right-side view Special keyboard buttons front view Wired keyboard and mouseLeft-side view Function key Performed taskActivities Indicator lightsOverview of the wired mouse front view Setting up the PC Preparing to setup your PCSetting up the PC Connecting the powerConnecting the wired keyboard and mouse Customizing the mouse settingsTurning on the PC Turning off the PCConfiguring the display Brightness controlConnecting to a wired network Using the PCConnecting to the Internet Using the PC Connecting to a wireless network for select modelsUsing the webcam Media Type Using the optical disc driveInserting a disc Read2. Gently pull out the disc tray 4. Gently push the disc tray back into the disk slotRemoving a disc Reading a discWriting to a disc Using memory cards Your system will automatically detect the inserted memory card and then display the content of the memory card Using the touch screen for select models Selecting items with your touch screenUsing the Peripheral Devices Connecting USB devicesUsing the Peripheral Devices Removing USB devicesScreen and computer Cleaning and careCleaning the screen and computer Cleaning the discs Cleaning and careCDs and DVDs ViewSonic Wizard CD and System Recovery and Driver Disk Storing your computerCleaning your keyboard and mouse Keyboard and mouseBIOS Setup Utility When to Use the BIOS Setup UtilityDescriptions BIOS Setup UtilityArea Menu Standard CMOS Features menuAdvanced BIOS Features menu when the ViewSonic logo appears on the Load Optimized Defaults menuTo select a boot device manually, press F9 screen during system startup. The Boot MenuExit Without Saving menu Set Password menuSave & Exit Setup menu Running ViewSonic Recovery Manager System RecoveryWhen to Use System Recovery 4. Click OK System RecoverySystem recovery is initiated and the following screen appears 5. Another confirmation message appears, as below. Click OKRestarting may take several seconds to finish 7. After the system has been restored, the following window appears8. Click OK to restart your All-in-One PC Running Recovery Disc Creation Tool 5. Click YES 7. Click OK to continue 6. Insert a blank disc when prompted to do so, and then click YES10. Store the recovery disc in a safe place for future use Using the recovery DVD Restarting may take several seconds to finish Power problems TroubleshootingFrequently asked questions FAQ Troubleshooting Internet access problemsOptical discs problems Display problems Keyboard and mouse problems Sound and microphone problems Miscellaneous problems VPC101 SpecificationsModel Specifications You will need the product serial number Other informationCustomer Support Country/RegionLimited Warranty Other information2. Any other damages, whether incidental, consequential or otherwise