Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam as Laser pointer function from the laser light window. When the LASER button is pressed, laser light goes on. When the LASER button is being pressed for more than 1 minute or the LASER button is released, light goes off. The signal emission indicator lights red and laser is emitted with red light to indicate laser beam is being emitted.
The laser emitted is a class II laser; therefore, do not look into the laser light window or shine the laser beam on yourself or other people. The marks below are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not look into the laser light window while laser is emitting, otherwise eye damage may result.
These caution labels are put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. (See “Pointer” on page 40 for changing the patterns and sizes.)
1 | While pressing the MENU button, hold down the NO SHOW |
| button for more than 7 seconds so that the Pointer function |
| can be available. (The Laser pointer function has switched to |
| the Pointer function.) |
2 | Press the LASER button on the remote control toward the |
| projector and see if the LASER button lights green, and |
| Spotlight or Pointer is displayed on the screen. Then you can |
| move Spotlight or Pointer with the PRESENTATION |
| POINTER button. If the LASER button does not light green |
| and still emits laser beam, the Laser pointer function has not |
| switched to the Pointer function yet. Try these steps until |
| the LASER button lights green. |
3 | To clear Spotlight or Pointer displayed on the screen, press |
| the LASER button toward the projector and see if the LASER |
button turns off.
To use the Laser pointer function once again, while pressing the MENU button, hold down the NO SHOW button for more than 7 seconds.
NO SHOW button
While pressing the MENU button, hold down the NO SHOW button for more than 7 seconds.
PRESENTATION POINTER button
MENU button
Spotlight | Pointer |
NOTE
●You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 40.
PRESENTATION POINTER button
LASER button
After the Laser pointer function has switched to the Pointer function, the LASER button is used as the Pointer function
Press the LASER button toward the projector and see if it lights green.
13