Eiki LC-SB20 Computer Input, Input Source Selection, RGB Analog, Input Menu, Source Select Menu

Computer Input

Input Source Selection

Direct Operation

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer 1

Computer 2 ✽

Video

COMPUTER button Computer 1

Computer 2 ✽

Menu Operation

1	Press the MENU button and the On-Screen Menu will appear.
	Press the Point Left/Right button to move the red frame pointer
	to the Input Menu icon.
2	Press the Point Down button to move the red arrow pointer to
	either Computer 1 or Computer 2 (Only the Computer 1 is
	displayed when Monitor out is selected in the Setting Menu.),
	and then press the SELECT button. The Source Select Menu
	will appear.
3	Move the pointer to the correct input source and then press the
	SELECT button.
		When the input source is analog coming from a
RGB (Analog)
		computer through the DVI terminal, select RGB
		(Analog).
		When the input source is digital coming from a
RGB (PC Digital)
		computer through the DVI terminal, select RGB (PC
		Digital)
		When the input source compatible with HDCP is
RGB (AV HDCP)
		coming from video equipment through the DVI
		terminal, select RGB (AV HDCP).
		When the input source is analog coming from a
RGB
		computer through the COMPUTER IN
		2/COMPONENT IN/MONITOR OUT terminal, select
		RGB.

✽Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out.

Input Menu

Input Menu icon

Move the pointer (red arrow)

to Computer 1 and press the

Computer SELECT button.

1

Source Select Menu

Move the pointer to RGB(Analog), RGB (PC Digital), or RGB(AV HDCP) and press the SELECT but- ton.

✽Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out.

Input Menu

Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to RGB and press the SELECT button.

NOTE

●HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied.

The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

24