Video Input
Input Source Selection (Video, S-Video)
Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be selected through menu operation as described below.
INPUT button
Video
Computer 1
Computer 2
VIDEO button Video
✽
✽When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed.
Menu Operation
1 | Press the MENU button and the | ||
| Press the Point Left/Right button to move the red frame pointer | ||
| to the Input Menu icon. | ||
2 | Press the Point Down button to move the red arrow pointer to | ||
| Video and then press the SELECT button. The Source Select | ||
| Menu will appear. | ||
3 | Move the pointer to the source that you want to select and then | ||
| press the SELECT button. | ||
|
| When selecting Auto, the projector automatically detects | |
| Auto | ||
| incoming video signal, and adjusts itself to optimize its | ||
|
| ||
|
| performance. The projector selects connection in the | |
|
| following order: | |
|
| 1st | |
|
| 2nd Video | |
|
| The | |
|
| the condition of connecting both the | |
|
| the VIDEO jack. | |
|
| When video input signal is connected to the VIDEO jack, | |
| Video | ||
| select Video. | ||
|
| ||
|
| When video input signal is connected to the | |
jack, select | |||
|
| ||
Input Menu
| Move the pointer to |
| |
| |
VIDEO | Video and press the |
SELECT button. |
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select and press the SELECT button.
✽When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed.
NOTE
●See “Computer Input” on page 24 for a signal compatible with HDCP.
32