Eiki LC-VC1 owner manual Color. From 0 to, Set On to reduce noise rough parts of the image

IMAGE LEVEL ADJUSTMENT

Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon.

2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. The level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).

Press POINT LEFT button to decrease contrast, and

POINT RIGHT

button to increase contrast. (From 0 to 63.)

Press POINT LEFT button to adjust image darker, and POINT

RIGHT button to adjust brighter. (From 0 to 63.)

Press POINT LEFT button to lighten color, and POINT RIGHT button

to deeper color. (From 0 to 63.)

Press POINT LEFT button or POINT RIGHT button to obtain proper

color. (From 0 to 63.)

Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

Press POINT LEFT button to lighten blue

tone and POINT RIGHT

button to deeper tone. (From 0 to 63.)

Press POINT LEFT button to soften the image, and POINT RIGHT

button to sharpen the image. (From 0 to 31.)

Press either POINT LEFT button or POINT RIGHT button to obtain

better balance of contrast. (From 0 to 15.)

Set “On” to reduce noise (rough parts) of the image.

NOTE: Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL- N.

Noise reduction cannot be selected when the input signal is

from Y, Pb/Cb, Pr/Cr jacks.

Progressive cannot be selected when “480p,” “575p” or

“72Op” is selected on SYSTEM Menu (P32).

Set “On” to provide progressive scan mode.