Intel IMB200VGE Chapter Introduction, Jumpers and Connectors, Installation, Hardware Description

	T a b l e o f C o n t e n t s
Disclaimers		ii
ESD Precautions		iii
Chapter	1 Introduction	1
1.1	General Description	1
1.2	Specifications	2
1.3	Utilities Supported	3
1.4	Ordering information	3
1.4	Board Dimensions	4
Chapter 2 Jumpers and Connectors		5
2.1	Board Layout	5
2.2	Jumper Settings	6

2.2.1Watchdog Tigger Mode: JP2……………………….. 6

2.2.2COM1 RS232/422/485 Settings: JP4, JP5,JP6….. 7

2.2.3Clear CMOS Setting: JP7…………………………… 7

2.2.4CF Master/Slave Setting: JP8………………………. 7

2.2.5CF Power Setting: JP9………………………………. 8

2.3	Connectors	9
Chapter 3 Installation		11
3.1	CPU Installation	11
3.2Installing ATX Power Supply………………………….. 18
3.3	Installing the Memory	18
Chapter 4 Hardware Description		20
4.2	Enhane IDE1/IDE2 connecotor-IDE1 and IDE2	21
4.3	Display interface-CN1	22
4.4	Floppy Disck Connector-FDD	22
4.5	Parallel Port Connector	23
4.6	COM1 Port Connector-CN2	24
4.7 COM2/3/4 Port Connector-CN25/CN27/CN33 support
RS232		25
4.8	USB and Giagbit LAN RJ-45Connector-CN6	25
4.9	USB and 10/100Mb LAN RJ-45Connector-CN7	26
4.10 USB Connector by pin header-CN30		26
iv