Intel IMB200VGE user manual Date, Time

Page 45

IMB200 LGA775 ATX MB User Manual

zDate

The date format is <day>, <month>, <date>, <year>. Press <F3> to show the calendar.

day

The day of week, from Sun to Sat, determined by

the BIOS, is read only

 

date

The date, from 1 to 31 (or the maximum allowed in

the month), can key in the numerical / function key

 

month

The month, Jan through Dec.

year

The year, depends on the year of BIOS

z Time

The time format is <hour> <minute> <second> accepting either functions key or numerical key. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

z IDE Channel 0 Master/IDE Channel 0 Slave/IDE Channel 1 Master/IDE Channel 1 Slave

The categories identify the types of one channel that have been installed in the computer. There are 45 predefined types and 2 users definable types are for Enhanced IDE BIOS. Type 1 to Type 45 is predefined. Type User is user-definable.

Press <PgUp>/<+> or <PgDn>/<> to select a numbered hard disk type or type the number and press <Enter>. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information within this category. If your hard disk drive type does not match or is not listed, you can use Type User to define your own drive type manually.

If you select Type User, related information is asked to be entered to the following items. Enter the information directly from the keyboard and press <Enter>. This information should be provided in the documentation from your hard disk vendor or the system manufacturer.

If the controller of HDD interface is ESDI, select “Type 1”. If the controller of HDD interface is SCSI, select “None”.

If the controller of HDD interface is CD-ROM, select “None”.

CYLS.

number of cylinders

LANDZONE

landing zone

HEADS

number of heads

SECTORS

number of sectors

PRECOMP

write precom

MODE

HDD access mode

If there is no hard disk drive installed, select NONE and press <Enter>.

Award Bios Utility

39

Image 45
Contents IMB200 Disclaimers ESD Precautions Installation Jumpers and ConnectorsChapter Introduction Hardware DescriptionChapter Installing LAN Driver Installing VGA driverChapter Award Bios Utility P e n d i x a Watchdog Timer P e n d i x B PCI IRQ RoutingPage General Description Introduction¾ CPU Socket LGA775 SpecificationsOrdering information Utilities SupportedBoard Dimensions Board Layout Jumpers and ConnectorsJumper Default Setting Jumper Setting Jumper SettingsClear Cmos Setting JP7 CF Power Setting JP9 CN7 ConnectorsPCI1~ CPU Installation InstallationInstallation Installation Installation Installation Installation Installation Installing the Memory Installing ATX Power SupplyInstallation Hardware Description General Output Connector CN37Enhance IDE1/IDE2 connecotor-IDE1 and IDE2 Display interface-CN1 Floppy Disk Connector-FDDParallel Port Connector COM1 Port Connector-CN2 Hardware Description Hardware Description USB USB USB USB Serial ATA Connectors-CN28/CN29 Hardware Description 16 CD/In Connector-CN9 17 CPU/System FAN Connector- CN23/CN24 Driver Disks’ Contents Installing VGA driverWindows 2000 VGA Driver Installation IntroductionPage Windows XP VGA Driver Installation Installing LAN Driver FeaturesDrivers Supported Award Bios Utility Bios IntroductionBios Setup Page Standard Cmos Setup Time DateHalt On Drive a type/Drive B typeCPU Feature Advanced Bios FeaturesExecute Disable Bit Delay prior to ThermalThermal Management Limited Cupid MaxValVirus Warning Quick Power On Self TestBoot Other Device First/Second/Third Boot DeviceBoot Up Floppy Seek Swap Floppy DriveApic Mode Boot Up NumLock StatusDarm Timing Selectable Advanced Chipset FeaturesDram RAS# to CAS# Delay Active Precharge DelaySystem Bios Cacheable Video Bios CacheableMemory Hole At 15M-16M AGP Aperture Size MBInit Display First On-Board Frame Buffer Size On-Chip VGAOn-Chip IDE Device Integrated PeripheralsIDE Primary Master PIO On-Chip Primary PCI IDEIDE Primary Slave PIO IDE Primary Master UdmaOn-Chip Serial ATA Onboard DeviceUSB 2.0 Controller USB ControllerUSB Keyboard Support AC97 AudioUR2 Duplex Mode Uart Mode SelectSuper IO Device Onboard FDC ControllerECP mode Use DMA Parallel Port ModeOnboard Uart 3/4 Onboard Parallel PortSpread Spectrum Onboard Uart 3/4 IRQPower Management Power Management SetupAcpi Function Acpi Suspend TypeHDD Power Down Suspend ModeVideo Off Method Video Off In SuspendPower On function Wake-Up By PCI card„ PWN After PWR-Fail PNP/PCI Configuration PNP OS InstalledReset Configuration Data „ PCI /VGA Palette Snoop „ Resource controlled byPC Health Status System FAN2 Speed Frequency/Voltage Control+3.3V/+5V/+12V/-12V/-5V/VBATV/5VSB CPU Clock RatioLoad Fail-Safe Default Load Optimized DefaultSupervisor/User Password Setting Enter Password Save to Cmos and Exit Y/N? Y Exit SettingQuit without saving Y/N? Y P e n d i x a Watchdog Timer P e n d i x B PCI IRQ Routing AppendixC Detailed memory Addess Mapping AppendixD I/O Shield