Technical Reference
2.10.2I/O Shield
The back panel I/O shield for the Desktop Board D865PCD must meet specific dimension and material requirements. Systems based on this Desktop Board need the back panel I/O shield to pass certification testing. Figure 17 shows the I/O shield. Dimensions are given in inches to a tolerance of ±0.02 inches.
The figure also indicates the position of each cutout. Additional design considerations for I/O shields relative to chassis requirements are described in the ATX specification. See Section 1.3 for information about the ATX specification.
✏NOTE
The I/O shield drawings in this document are for reference only. An I/O shield compliant with the ATX chassis specification 2.03 is available from Intel.
0.884
[22.450]
0.276
[7.012]
0.00
0.465
[11.811]
0.567
[14.400]
6.390 Ref
[162.300]
0.787±0.010 TYP [20±0.254]
3x Dia 0.330 [8.380]
0.039 Dia. [1.000]
0.00 | 0.447 | [11.345] | 1.195 | [30.360] | 1.807 | [45.892] | 2.079 | [52.804] | 5.010 | [127.250] | 5.732 | [145.584] |
0.063±0.005
[1.600±0.120]
8X R0.5 MIN
0.519
[13.190]
0.027
[0.690] 1.89
0.465 Ref
[11.811]
0.567
[14.400]
0.621
[15.770]
Pictorial
View
OM12352
Figure 17. I/O Shield Dimensions
59