Technical Reference
2.8.2.4Add-in Board and Peripheral Interface Connectors
Figure 11 shows the location of the add-in board connector and peripheral connectors. Note the following considerations for the PCI bus connectors:
•All of the PCI bus connectors are bus master capable.
•SMBus signals are routed to PCI bus connector 2. This enables PCI bus add-in boards with SMBus support to access sensor data on the Desktop Board. The specific SMBus signals are as follows:
The SMBus clock line is connected to pin A40.
The SMBus data line is connected to pin A41.
A | B | C | D |
|
|
|
| 2 | 40 |
|
|
| 39 2 | |
|
|
| 1 | |
|
|
| 2 | 34 |
|
|
| 1 | 33 |
|
|
|
| 39 1 |
|
| G | F | E |
|
|
|
|
| OM17037 |
|
| Item | Description | Item | Description |
|
| A | PCI bus connector 3 | E | Diskette drive |
|
| B | PCI bus connector 2 | F | Primary IDE [black] |
|
| C | PCI bus connector 1 | G | Secondary IDE [white] |
|
| D | AGP connector |
|
|
|
|
|
|
|
|
|
Figure 11. D865PCD Add-in Board and Peripheral Interface Connectors
51