Intel D865PCD specifications Exit Menu, Atapi CD-ROM Drives Submenu

BIOS Setup Program

4.7.4ATAPI CD-ROM Drives Submenu

To access this menu, select Boot on the menu bar and then ATAPI CD-ROM Drives.

Maintenance Main Advanced Security Power

Boot Exit

Boot Device Priority

Hard Disk Drives

Removable Devices

ATAPI CD-ROM Drives

The submenu represented in Table 61 is for setting ATAPI CD-ROM drive priority.

Table 61. ATAPI CD-ROM Drives Submenu

Feature

1st ATAPI CDROM

(Note)

Options

Dependent on installed ATAPI CD-ROM drives

Description

Specifies the boot sequence from the available ATAPI CD-ROM drives. To specify boot sequence:

1.Select the boot device with <↑> or <↓>.

2.Press <Enter> to set the selection as the intended boot device.

Note:	This boot device submenu appears only if at least one boot device of this type is installed. This list will display up
	to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.

4.8 Exit Menu

To access this menu, select Exit from the menu bar at the top of the screen.

Maintenance Main Advanced Security Power Boot

Exit

The menu represented in Table 62 is for exiting the BIOS Setup program, saving changes, and loading and saving defaults.

Table 62. Exit Menu

Feature

Exit Saving Changes

Exit Discarding Changes

Load Optimal Defaults

Load Custom Defaults

Save Custom Defaults

Discard Changes

Description

Exits and saves the changes in CMOS SRAM.

Exits without saving any changes made in the BIOS Setup program.

Loads the optimal default values for all the Setup options.

Loads the custom defaults for Setup options.

Saves the current values as custom defaults. Normally, the BIOS reads the Setup values from flash memory. If this memory is corrupted, the BIOS reads the custom defaults. If no custom defaults are set, the BIOS reads the factory defaults.

Discards changes without exiting Setup. The option values present when the computer was turned on are used.

99