BIOS Setup Program
4.4.4Drive Configuration Submenu
To access this submenu, select Advanced on the menu bar and then Drive Configuration.
Maintenance Main
| Advanced |
| Security | Power | Boot | Exit |
| ||
|
|
|
|
|
|
|
|
|
|
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
The menu represented in Table 47 is used to configure IDE device options.
Table 47. Drive Configuration Submenu
Feature
PCI IDE Bus Master
Hard Disk
SATA
SATA
PATA Primary Master
PATA Primary Slave
PATA Secondary Master
PATA Secondary Slave
Options
•Disabled
•Enabled (default)
•Disabled (default)
•1 Second
•2 Seconds
•3 Seconds
•4 Seconds
•5 Seconds
•6 Seconds
•9 Seconds
•12 Seconds
•15 Seconds
•21 Seconds
•30 Seconds
None
None
Select to display
Select to display
Select to display
Select to display
Description
Enables/disables the use of DMA for hard drive BIOS INT13 reads and writes.
Specifies the hard disk drive
Not supported
Not supported
Reports type of connected device on Parallel ATA (PATA) IDE primary master interface.
Reports type of connected device on Parallel ATA (PATA) IDE primary slave interface.
Reports type of connected device on Parallel ATA (PATA) IDE secondary master interface.
Reports type of connected device on Parallel ATA (PATA) IDE secondary slave interface.
continued
85