ABSOLUTE MAXIMUM RATINGS*
Ambient Temperature Under Bias ÀÀÀÀ0§C to a70§C Storage Temperature ÀÀÀÀÀÀÀÀÀÀb65§C to a150§C
Voltage on Any Pin with
Respect to GroundÀÀÀÀÀÀÀÀÀÀÀÀÀÀb0.5V to a7V
Power Dissipation ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ1.5 W
UPI-C42/UPI-L42
NOTICE: This is a production data sheet. The specifi- cations are subject to change without notice.
*WARNING: Stressing the device beyond the ‘‘Absolute Maximum Ratings’’ may cause permanent damage. These are stress ratings only. Operation beyond the ‘‘Operating Conditions’’ is not recommended and ex- tended exposure beyond the ‘‘Operating Conditions’’ may affect device reliability.
DC CHARACTERISTICS TA e 0§C to a70§C, VCC e VDD e a5V g10%; a3.3V g10%
Symbol | Parameter |
|
| Units | Notes | |||
|
|
|
| |||||
Min | Max | Min | Max | |||||
|
|
|
| |||||
|
|
|
|
|
|
|
| |
VIL | Input Low Voltage | b0.5 | 0.8 | b0.3 | a0.8 | V | All Pins | |
VIH | Input High Voltage | 2.0 | VCC | 2.0 | VCC a 0.3 | V |
| |
| (Except XTAL2, RESET) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
VIH1 | Input High Voltage | 3.5 | VCC | 2.0 | VCC a 0.3 | V |
| |
| (XTAL2, RESET) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
VOL | Output Low Voltage (D0 – D7) |
| 0.45 |
| 0.45 | V | IOL e 2.0 mA | |
|
|
|
|
|
|
| IOL e 1.3 mA | |
VOL1 | Output Low Voltage |
| 0.45 |
| 0.45 | V | IOL e 1.6 mA | |
| (P10P17, P20P27, Sync) |
|
|
|
|
| IOL e 1 mA | |
VOL2 | Output Low Voltage (PROG) |
| 0.45 |
| 0.45 | V | IOL e 1.0 mA | |
|
|
|
|
|
|
| IOL e 0.7 mA | |
VOH | Output High Voltage (D0 – D7) | 2.4 |
| 2.4 |
| V | IOH e b400 mA | |
|
|
|
|
|
|
| IOH e b260 mA | |
VOH1 | Output High Voltage | 2.4 |
| 2.4 |
|
| IOH e b50 mA | |
| (All Other Outputs) |
|
|
|
|
| IOH e b25 mA | |
IIL | Input Leakage Current |
| g10 |
| g10 | mA | VSS s VIN s VCC | |
| (T0, T1, RD, WR, CS, A0, EA) |
|
|
|
|
|
| |
IOFL | Output Leakage Current |
| g10 |
| g10 | mA | VSS a 0.45 s VOUT s VCC | |
| (D0 – D7, High Z State) |
|
|
|
|
|
| |
ILI | Low Input Load Current | b50 | b250 | b35 | b175 | mA | Port Pins | |
| (P10P17, P20P27) |
|
|
|
|
| Min VIN e 2.4V | |
|
|
|
|
|
|
| Max VIN e 0.45V | |
ILI1 | Low Input Load Current |
| b40 |
| b40 | mA | VIN s VIL | |
| (RESET, SS) |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
IHI | Port Sink Current |
|
|
| 5.0 | mA | VCC e 3.0V | |
| (P10P17, P20P27) |
|
|
| VIH e 5.0V | |||
|
|
|
|
|
| |||
IDD | VDD Supply Current |
| 4 |
| 2.5 | mA |
| |
15