Intel UPI-L42, UPI-C42 specifications DC Characteristics

UPI-C42/UPI-L42

DC CHARACTERISTICS

TA e 0§C to a70§C, VCC e VDD e a5V g10%; a3.3V g10% UPI-L42 (Continued)

Symbol	Parameter	UPI-C42		UPI-L42		Units	Notes
		Min	Max	Min	Max
ICC a IDD	Total Supply Current:
	Active Mode @ 12.5 MHz		30		20	mA	Typical 14 mA UPI-C42,
							9 mA UPI-L42
	Suspend Mode		40		26	mA	Osc. Off(1, 4)
IDD Standby	Power Down		5		3.5	mA	NMOS Compatible
	Supply Current						Power Down Mode
IIH	Input Leakage Current		100		100	mA	VIN e VCC
	(P10 – P17, P20 – P27)
CIN	Input Capacitance		10		10	pF	TA e 25§C (1)
CIO	I/O Capacitance		20		20	pF	TA e 25§C (1)
NOTE:

1. Sampled, not 100% tested.

DC CHARACTERISTICS—PROGRAMMING(UPI-C42 AND UPI-L42)TA e 25§C g5§C, VCC e 6.25V g0.25V, VDD e 12.75V g0.25V

Symbol	Parameter	Min	Max	Units
VDDH	VDD Program Voltage High Level	12.5	13	V(1)
VDDL	VDD Voltage Low Level	4.75	5.25	V
VPH	PROG Program Voltage High Level	2.0	5.5	V
VPL	PROG Voltage Low Level	b0.5	0.8	V
VEAH	Input High Voltage for EA	12.0	13.0	V(2)
VEAL	EA Voltage Low Level	b0.5	5.25	V
IDD	VDD High Voltage Supply Current		50.0	mA
IEA	EA High Voltage Supply Current		1.0	mA(4)

NOTES:

1.Voltages over 13V applied to pin VDD will permanently damage the device.

2.VEAH must be applied to EA before VDDH and removed after VDDL.

3.VCC must be applied simultaneously or before VDD and must be removed simultaneously or after VDD.

4.Sampled, not 100% tested.

16