Konica Minolta AF-2840 instruction manual Loading a film holder into the scanner

LOADING THE FILM HOLDERS

Loading a film holder into the scanner

Using the FH-U1 and SH-U1 film holders

Before using the scanner, install the scanner utility software (p. 12). With the front door closed, turn on the scanner and then start the computer. Launch the software before inserting the film holder (p. 24, 31). Do not insert the film holder into the scanner while the utility software is launch- ing or the scanner is initializing; the indicator lamp blinks slowly during this period.

When the indicator lamp glows steadily, open the front door until the top of the door is aligned with the 35mm film-holder mark.

Insert the film holder into the scanner in the direction indicated by the arrow. Hold the hold- er straight and level when inserting it into the scanner.

Carefully push the holder into the scanner until
the arrow mark is aligned with the scanner	FH-U1
door; the holder will be automatically fed into
the scanner from that point. Never touch or hin-
der the holder when it is in the scanner.

SH-U1

Using the APS Adapter AD-10 (sold separately)

APS (Advanced Photo System) cassette film can be scanned using the APS Adapter AD-10. The cassette must contain processed film; the square number 4 mark at the end of the cassette should be highlighted in white. Do not load unprocessed film.

2

1

To load an APS cassette, slide the film-cham- ber release (1) toward the top of the adapter unit until the chamber door opens (2). The film-chamber release will not return to its orig- inal position until the door is closed.

Scanner contacts (Keep clean)

22