Overview
1
1.3Setting up the system
In order to use this printing system, it must first be set up.
Setup consists of connecting this machine to a computer and installing the fax driver onto the computer being used.
!
Detail
This manual describes the setup method of network connection only for Port9100 that will be installed by the installer, and LPR/Port9100 that will be installed by Add Printer Wizard printing.
1.3.1Network connection
1
2
3
Connect this machine to a computer.
Make sure the computer is connected to the network.
Specify the IP address of the machine to connect it to the network.
–For details on IP address and network settings of the machine, refer to the User’s Guide [Print Operations].
4 Depending on the connection method and protocol, change the net- work settings of this machine.
–LPR: Enable the LPD settings on the TCP/IP Setting screen.
–Port9100: Enable the RAW port setting on the TCP/IP Setting screen, and specify the RAW port number (default setting is “9100”).
–Windows printing: Enable “Windows printing” on the Windows Set- ting screen.
–IPP: Enable IPP print on the IPP Setting screen.
5 Install the fax driver.
–Specify the network port of the fax driver according to the connec- tion method and protocol.
Fax Driver |