ViewSonic VS13789 manual Connect to an Access Point

Page 21

2-2-1-2 Connect to an Access Point

If the wireless access point you wish to connect is found, you can establish connection with it by clicking ‘Connect’ button. Instructions will be given as follow:

1.Click the wireless access point or network device you wish to connect, it will be highlighted, then click ‘Connect’.

If the access point you selected does not use encryption, you’ll be connected to this wireless access point within one minute. If the access point you selected uses encryption, please proceed to step 3.

2.If the wireless access point does not have SSID, you’ll be prompted to input it now. Please ask the owner of wireless access point for the exact SSID and input it here, then click ‘OK’ when ready. If the SSID you provided here is wrong, you’ll not be able to connect to this access point.

3.If the wireless access point uses encryption, you will be prompted to input its WEP key or WPA preshared key.

ViewSonic WPD-100

15

Image 21

Contents ViewSonic Compliance Information FCC Radiation Exposure Statement Declaration of RoHS Compliance Copyright Information T a L O G Other features of WPD-100 including Safety Information System Requirements Package Contents Familiar with WPD-100 ViewSonic WPD-100 ViewSonic WPD-100 Connect to Wireless Access Point Using WPD-100 Utility Scan for Other Wireless Devices AB C DE ViewSonic WPD-100 There are 4 types of technical information To connect to the selected access point Connect to an Access Point ViewSonic WPD-100 Add an Access Point to Profile Ssid Can drag the slider to set the threshold value, or input WPA Ttls ‘Use protected authentication credential’ box, and click Here are descriptions of Profile List item Using Windows Zero Configuration ViewSonic WPD-100 ViewSonic WPD-100 Advanced Settings View Network Statistics WMM SettingSeconds, and input ‘0’ for infinity WPS Configuration WPS Setup PBC Push-Button Configuration ViewSonic WPD-100 WPS Setup PIN SSO CCX CCXAbout Radio On/OffOn-line Help Chapter III Soft-AP Function Switch to AP Mode and Basic ConfigurationItem Name Description Are in different country. For example when Be operated. Selection of other channels is notPermitted under FCC regulations Type Security SettingData will not be encrypted and people with some Access Control Reject All Reject wireless clients with MAC address AID Connection TableEvent Log Statistics Open Diagnostic Testing Mode Chapter IV Appendix Specification Troubleshooting An access point with encryption. Please Customer Support Limited Warranty