ViewSonic VS13789 manual WPS Setup PIN

Page 39

2-6-2 WPS Setup - PIN

If the wireless access point you wish to connect supports PIN, please follow the following instructions to establish connection to it:

1.The PIN code of your wireless network card is an eight-digit number located at the upper-right position of the utility. Remember it, and input the number to your wireless access point as the WPS PIN code (Please refer to the user manual of your wireless access point for instructions about how to do this).

NOTE: If you experienced problem with the pin code provided here, you can click ‘Renew’ to get a new pin code.

2.Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access point with correct PIN code is found, you’ll be connected to that access point.

3.If not, you may have to click ‘PIN’ for few more times to try again. If you still can not connect to access point by this way, please make sure the PIN code you provided to access point is correct.

ViewSonic WPD-100

33

Image 39

Contents ViewSonic Compliance Information FCC Radiation Exposure Statement Declaration of RoHS Compliance Copyright Information T a L O G Other features of WPD-100 including Safety Information System Requirements Package Contents Familiar with WPD-100 ViewSonic WPD-100 ViewSonic WPD-100 Connect to Wireless Access Point Using WPD-100 Utility Scan for Other Wireless Devices AB C DE ViewSonic WPD-100 There are 4 types of technical information To connect to the selected access point Connect to an Access Point ViewSonic WPD-100 Add an Access Point to Profile Ssid Can drag the slider to set the threshold value, or input WPA Ttls ‘Use protected authentication credential’ box, and click Here are descriptions of Profile List item Using Windows Zero Configuration ViewSonic WPD-100 ViewSonic WPD-100 Advanced Settings View Network Statistics WMM SettingSeconds, and input ‘0’ for infinity WPS Configuration WPS Setup PBC Push-Button Configuration ViewSonic WPD-100 WPS Setup PIN SSO CCX CCXAbout Radio On/OffOn-line Help Chapter III Soft-AP Function Switch to AP Mode and Basic ConfigurationItem Name Description Are in different country. For example when Be operated. Selection of other channels is notPermitted under FCC regulations Type Security SettingData will not be encrypted and people with some Access Control Reject All Reject wireless clients with MAC address AID Connection TableEvent Log Statistics Open Diagnostic Testing Mode Chapter IV Appendix Specification Troubleshooting An access point with encryption. Please Customer Support Limited Warranty