ViewSonic VS13789 manual Advanced Settings

Page 33

2-3 Advanced Settings

This wireless network card provides several advanced settings for experienced wireless users.

Here are descriptions of every setup item:

Item Name

Description

Wireless mode

Display the wireless operation mode of the network card.

Enable Tx Burst

Check this box to accelerate the data transmit rate. It

 

may not work with all wireless access point and wireless

 

devices.

Enable TCP

Check this box and the configuration utility will adjust

Window Size

TCP window size automatically to get better

 

performance. It should be safe for most of wireless

 

environments, but if you found some problem on data

 

transfer, uncheck this box.

Fast Roaming

Check this box and you can control the threshold that

 

the wireless network card should switch to another

 

wireless access point with better signal quality. Only

 

adjust value when you understand what it means and

 

you need to roam between multiple access points.

Show

When your computer is being authenticated by wireless

Authentication

authentication server, a dialog window with the process

Status Dialog

of authentication will appear. This function is helpful to

 

find out the problem when you can not be authenticated,

 

and you can provide this information to authentication

 

server’s administrator for debugging purpose.

After you finish the settings, click ‘Apply’ to apply new settings.

ViewSonic WPD-100

27

Image 33
Contents ViewSonic Compliance Information FCC Radiation Exposure Statement Declaration of RoHS Compliance Copyright Information T a L O G Other features of WPD-100 including Safety Information System Requirements Package Contents Familiar with WPD-100 ViewSonic WPD-100 ViewSonic WPD-100 Connect to Wireless Access Point Using WPD-100 Utility Scan for Other Wireless Devices AB C DE ViewSonic WPD-100 There are 4 types of technical information To connect to the selected access point Connect to an Access Point ViewSonic WPD-100 Add an Access Point to Profile Ssid Can drag the slider to set the threshold value, or input WPA Ttls ‘Use protected authentication credential’ box, and click Here are descriptions of Profile List item Using Windows Zero Configuration ViewSonic WPD-100 ViewSonic WPD-100 Advanced Settings View Network Statistics WMM SettingSeconds, and input ‘0’ for infinity WPS Configuration WPS Setup PBC Push-Button Configuration ViewSonic WPD-100 WPS Setup PIN SSO CCX CCXAbout Radio On/OffOn-line Help Chapter III Soft-AP Function Switch to AP Mode and Basic ConfigurationItem Name Description Are in different country. For example when Be operated. Selection of other channels is notPermitted under FCC regulations Type Security SettingData will not be encrypted and people with some Access Control Reject All Reject wireless clients with MAC address AID Connection TableEvent Log Statistics Open Diagnostic Testing Mode Chapter IV Appendix Specification Troubleshooting An access point with encryption. Please Customer Support Limited Warranty