ViewSonic VS13789 manual ‘Use protected authentication credential’ box, and click

	If you need to use protected authentication credential, check
	‘Use protected authentication credential’ box, and click
	‘Import’ to load .pac credential file; to remove a loaded
	credential file, click ‘Remove’.
Session	You can enable or disable session resumption here. If you
Resumption	don’t know if you should enable session resumption or not,
	please ask your 802.1x authentication administrator.
ID \ Password	Input 802.1x username (ID) and password and other
tab	information if it is required here. Click ‘Show Password’ to
	show the password you typed.
Client	Use this tab to select a local certificate from dropdown
Certification	menu. If the access point you wish to connect required a
tab	specific client certificate, the certificate must be installed on
	your computer, and you can select the certificate here.
Server	Use this tab to use server-based certification. Please select
Certification	a CA (Certificate Authority) from dropdown menu. If
tab	intermediate certificates are allowed, please select ‘Allow
	intermediate certificates’. Also, if you need to specify CA
	server’s name, you can specify it in ‘Server name’ field. You
	can select ‘Server name must match’, so the CA server’s
	name must be the same with the value you set in ‘Server
	name’ field; If only the domain name part of full server name
	must the same with the value you set in ‘Server name’ field,
	select ‘Domain name must end in specified name’.

After you complete all information related to the access point, click ‘OK’ to save the profile, or click ‘cancel’ to cancel adding a new profile.

If the profile is created, you will see the information in the Profile List.

ViewSonic WPD-100 22