ViewSonic VS13789 manual An access point with encryption. Please

Page 57

	3. You have to input correct security key to connect
		an access point with encryption. Please
		contact the owner of access point to ask for
		correct security key.
	4. The access point you wish to connect only
		allows network cards with specific MAC
		address to establish connection. Please go to
		‘About’ tab and write the value of ‘Phy_Addess’
		down, then present this value to the owner of
		access point so he / she can add the MAC
		address of your network card to his / her
		access point’s list.
The network is slow /	1.	Move closer to the place where access point is
having problem when		located.
transferring large files	2.	Disable ‘Tx Burst’ in ‘Advanced’ tab.
	3.	Enable ‘WMM’ in ‘WMM’ tab if you need to use
		multimedia / telephony related applications.
	4.	Disable ‘WMM – Power Save Enable’ in ‘WMM’
		tab.
	5.	There could be too much people using the
		same radio channel. Ask the owner of the
		access point to change the channel number.
	Please try one or more solutions listed above.

ViewSonic WPD-100

51

Image 57

Contents ViewSonic Compliance Information FCC Radiation Exposure Statement Declaration of RoHS Compliance Copyright Information T a L O G Other features of WPD-100 including Safety Information System Requirements Package Contents Familiar with WPD-100 ViewSonic WPD-100 ViewSonic WPD-100 Connect to Wireless Access Point Using WPD-100 Utility Scan for Other Wireless Devices AB C DE ViewSonic WPD-100 There are 4 types of technical information To connect to the selected access point Connect to an Access Point ViewSonic WPD-100 Add an Access Point to Profile Ssid Can drag the slider to set the threshold value, or input WPA Ttls ‘Use protected authentication credential’ box, and click Here are descriptions of Profile List item Using Windows Zero Configuration ViewSonic WPD-100 ViewSonic WPD-100 Advanced Settings View Network Statistics WMM SettingSeconds, and input ‘0’ for infinity WPS Configuration WPS Setup PBC Push-Button Configuration ViewSonic WPD-100 WPS Setup PIN SSO CCX CCXAbout Radio On/OffOn-line Help Chapter III Soft-AP Function Switch to AP Mode and Basic ConfigurationItem Name Description Are in different country. For example when Be operated. Selection of other channels is notPermitted under FCC regulations Type Security SettingData will not be encrypted and people with some Access Control Reject All Reject wireless clients with MAC address AID Connection TableEvent Log Statistics Open Diagnostic Testing Mode Chapter IV Appendix Specification Troubleshooting An access point with encryption. Please Customer Support Limited Warranty