ViewSonic VS13789 manual Ttls

	The length of WEP key depends on the type of WEP key
	you selected. You can input 10 or 26 hexadecimal
	characters and 5 or 13 ASCII characters as WEP key.
Use 802.1x	If the access point you wish to connect requires 802.1x
	authentication, please click on ‘Use 802.1x’ box, then click
	‘802.1X’ tab to set 802.1x parameters.

To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:

Here are descriptions of every setup item:

Item Name	Description
EAP Method	Select 802.1x EAP method from dropdown menu. Please
	ask the administrator of the access point you wish to
	connect to select a correct EAP method.
Tunnel	Select 802.1x tunnel authentication type from dropdown
Authentication	menu. Please ask the administrator of the access point you
	wish to connect to select a correct tunnel authentication
	method. This pull down menu is only available when
	authentication type you use is 'PEAP', ‘TLS / Smart Card', or
	'TTLS'.
	When you use 'EAP-FAST' as authentication type, the
	protocol setting is always 'Generic Token Card' and can not
	be changed. You also need to select ‘Soft Token’ or ‘Static
	Password’ as password in ‘ID \ Password’ setting.
	’EAP Fast’ authentication type also have a sub-menu to set
	EAP fast-specific parameters:

ViewSonic WPD-100 21