Nikon AX-110 manual Appendix Specifications

Page 44

Appendix: Specifications

Appendix: Specifications

Scan Speed:24 Seconds/A4 (300 dpi, Color Mode)

Preview Speed:6 Seconds/A4 (Color Mode) at 100dpi 3.5 Seconds/A4 (Gray/Line art Mode) at 100dpi

Maximum Scannable Area:

 

216 x 297 mm (8.5 x 11.7 Inches)

Optical Resolution:

300 x 600 dpi

Color Scanning Method:

One pass with color CCD

Sample Depth:

 

Color Mode:

24 Bit/Pixel Internal

Grayscale Mode:

8 Bit/Pixel Internal

Line-Art Mode:

1 Bit/Pixel

Scanner Settings:

 

Scaling:

1% to 200% in 1% Increments at 600

 

dpi Resolution

Highlight/Shadow:

255 Steps

Contrast/Brightness:

+100% to –100%

Gamma Curve:

Downloadable Curves

Data Output

 

Color Mode:

24 Bit (Hardware) / 24 Bit (System)

Grayscale Mode:

8 Bit (Hardware) / 8 Bit (System)

Interface:

Built-in SCSI 2; One 25-pin Connector

 

and One 50-pin Connector

Power Requirements:

 

Voltage:

100 - 240V AC

Frequency:

50/60 Hz

Power Consumption:

Maximum 52 Watts

34

Nikon ScanTouch 110 User's Manual

Image 44
Contents Page Page ScanTouch Flatbed ScannerIndication Trademark InformationImportant Safeguard Wichtige SicherheitshinweiseModifications Scsi CableWhen Taking the Unit Out of The Country Items prohibited by law from being copied or reproduced Contents Operation Overview Power Supply Precautions Before Operating the ScannerShape of the plug depends on the country of use Handling Precautions RemarksBefore Operating the Scanner Before Operating the Scanner Do not store or use where If You Notice Anything AbnormalStorage and Operating Locations Before Operating the Scanner Before Operating the Scanner Transportation Precaution Components Parts IdentificationInspection Scsi cable Power cord Main Body Closer LookRear View Unlocking the Scanner Connecting the Scanner Before ConnectionConnecting the Power Cord Remarks Connecting the Scsi Cable Connecting to the Macintosh computer Scsi Chain Connection with Other Devices Remarks Setting the Scsi ID Turning on the Power OperationOperation Setting a Document Step Close the document cover gently Maintenance Static Electricity PrecautionsCleaning If the scanner lamp flickers, is dim, or fails to come on TroubleshootingIf the Power indicator fails to come on Troubleshooting If All Else Fails Appendix Specifications Dimensions Net WeightEnvironmental Ranges Systems SupportedSymbols IndexEC Declaration of Conformity