Nikon AX-110 manual Setting the Scsi ID

Page 33

4. Connecting the Scanner

4.4Setting the SCSI ID

The SCSI ID for the ScanTouch 110 is set at “5” when the unit is shipped. If other SCSI devices are connected to your computer, make sure that the SCSI ID for the ScanTouch 110 is different from those assigned to other SCSI devices.

Note that in the case of a host computer which has a built-in SCSI hard disk or built-in CD-ROM, the ID numbers of the host CPU and each SCSI device have already been assigned.

If the IDs are duplicated, you must change the ID number of the other SCSI device or of the ScanTouch 110 to avoid any conflict.

Remarks

•To change the ID, confirm that the scanner power is off. The ID cannot be changed when the power is on.

•Do not use SCSI ID 8 and 9 or A through F on your scanner. They are for factory use only.

•As 7 has been assigned for the CPU and 0 has been assigned to the built-in hard disk for a Macintosh, and 0 and 7 have also been assigned to other personal computer systems, any number from 1 to 6 is recommended for the ID number.

•If conflicting ID numbers are assigned, your system might not function, or important data on the hard disk might be destroyed. It is therefore essential to check the ID numbers carefully before connecting the scanner.

Nikon ScanTouch 110 User's Manual

23

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Page Flatbed Scanner ScanTouchTrademark Information IndicationWichtige Sicherheitshinweise Important SafeguardScsi Cable ModificationsWhen Taking the Unit Out of The Country Items prohibited by law from being copied or reproduced Contents Operation Overview Before Operating the Scanner Power Supply PrecautionsShape of the plug depends on the country of use Remarks Handling PrecautionsBefore Operating the Scanner Before Operating the Scanner If You Notice Anything Abnormal Storage and Operating LocationsDo not store or use where Before Operating the Scanner Before Operating the Scanner Transportation Precaution Parts Identification InspectionComponents Scsi cable Power cord Closer Look Main BodyRear View Unlocking the Scanner Before Connection Connecting the ScannerConnecting the Power Cord Remarks Connecting the Scsi Cable Connecting to the Macintosh computer Scsi Chain Connection with Other Devices Remarks Setting the Scsi ID Operation Turning on the PowerOperation Setting a Document Step Close the document cover gently Static Electricity Precautions MaintenanceCleaning Troubleshooting If the Power indicator fails to come onIf the scanner lamp flickers, is dim, or fails to come on Troubleshooting If All Else Fails Appendix Specifications Net Weight DimensionsEnvironmental Ranges Systems SupportedIndex SymbolsEC Declaration of Conformity
Top Page Image Contents