Nikon AX-110 manual Scsi Chain Connection with Other Devices

Page 31

4. Connecting the Scanner

SCSI Chain Connection with Other Devices

If your ScanTouch is connected at the end of the SCSI chain, install the supplied terminator to the other SCSI connector on the rear of ScanTouch. If your ScanTouch is connected between the other SCSI devices, no terminator on ScanTouch is necessary.

Since the terminator is built into the host computer in most cases, the host computer should be at the end of the SCSI chain. Some notebook computers require a terminator to be attached outside the computer; please refer to the operation manual for the computer.

Note: The SCSI cable used for SCSI connection should be of high- impedance type.

the other SCSI device	ScanTouch
	Terminator
ScanTouch	the other SCSI device

the other SCSI device	ScanTouch
	Terminator
ScanTouch	the other SCSI device

Nikon ScanTouch 110 User's Manual

21

Image 31

Contents Page Page Flatbed Scanner ScanTouchTrademark Information IndicationWichtige Sicherheitshinweise Important SafeguardScsi Cable ModificationsWhen Taking the Unit Out of The Country Items prohibited by law from being copied or reproduced Contents Operation Overview Before Operating the Scanner Power Supply PrecautionsShape of the plug depends on the country of use Remarks Handling PrecautionsBefore Operating the Scanner Before Operating the Scanner Storage and Operating Locations If You Notice Anything AbnormalDo not store or use where Before Operating the Scanner Before Operating the Scanner Transportation Precaution Inspection Parts IdentificationComponents Scsi cable Power cord Closer Look Main BodyRear View Unlocking the Scanner Before Connection Connecting the ScannerConnecting the Power Cord Remarks Connecting the Scsi Cable Connecting to the Macintosh computer Scsi Chain Connection with Other Devices Remarks Setting the Scsi ID Operation Turning on the PowerOperation Setting a Document Step Close the document cover gently Static Electricity Precautions MaintenanceCleaning If the Power indicator fails to come on TroubleshootingIf the scanner lamp flickers, is dim, or fails to come on Troubleshooting If All Else Fails Appendix Specifications Systems Supported DimensionsNet Weight Environmental RangesIndex SymbolsEC Declaration of Conformity