![](/images/new-backgrounds/1102779/10277939x1.webp)
Locating parts on the system board
Figure 4 shows the location of the parts on the system board.
Figure 4. System board parts locations |
|
1 | 13 Internal speaker connector |
2 System fan connector | 14 Front USB connector 2 |
3 Microprocessor fan connector | 15 Clear CMOS (Complementary |
| Semiconductor)/Recovery jumper |
4 Microprocessor and heat sink | 16 Front USB connector 1 |
5 Memory slots (4) | 17 Serial (COM2) connector |
6 | 18 Serial (COMl) connector |
7 Thermal sensor connector | 19 |
8 Diskette drive connector | 20 Front audio connector |
9 Cover presence (Intrusion) switch | 21 PCI card slots (2) |
connector |
|
10 SATA connectors (4) | 22 PCI Express x16 graphics card slot |
11 Power fan connector | 23 PCI Express x1 card slot |
12 Front panel connector | 24 Battery |
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can add drives to your computer to increase storage capacity and enable your computer to read other types of media. Internal drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and size of the drive that you can install or replace in each bay and correctly connect
12User Guide