![](/images/new-backgrounds/1102779/10277959x1.webp)
If you are replacing an old memory module, open the retaining clips and remove the memory module being replaced as shown.
Figure 11. Removing the memory module
6.Position the memory module over the memory slot. Make sure that the notch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until the retaining clips close.
Figure 12. Installing the memory module
What to do next:
vTo work with another option, go to the appropriate section.
vTo complete the installation, go to “Completing the parts replacement” on page 45.
Replacing the battery
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support