![](/images/new-backgrounds/1102779/102779157x1.webp)
3.Turn the mouse upside down to look at the lens.
a.If there is a smudge on the lens, gently clean the area with a plain
b.If there is debris in the lens, gently blow the debris away from the area.
4.Check the surface on which you are using the mouse. If you have a very intricate picture or pattern beneath the mouse it may be difficult for the digital signal processor (DSP) to determine changes in the mouse position.
5.Reconnect the mouse cable to the computer.
6.Turn your computer back on.
Non-optical mouse
The
1 Retainer ring 2 Ball
3 Plastic rollers 4 Ball cage
To clean the
Note: The following illustration might be slightly different from your mouse.
1.Turn off your computer.
2.Disconnect the mouse cable from the computer.
3.Turn the mouse upside down. Twist the retainer ring 1 to the unlocked position to remove the ball.
4.Place your hand over the retainer ring and ball 2, and then turn the mouse
5.Wash the ball in warm, soapy water then dry it with a clean cloth.
Chapter 6. Troubleshooting and diagnostics 71