Tascam CC-222MK owner manual Display

Page 13

2- Features of the CC-222MK$

Display

( )Q

W E

R

TYUI

OPADF G

H J

K

L

:ZXC

S

 

 

 

This display shows various types of operation informa- tion, including CD disc information, deck operation modes, and menu status.

(Tape PLAY Lights when a tape is being played back or recording.

)˙/¥ (Tape-running indicator) Shows the direction of a tape during playback or recording.

QTape pause (π) Lights when the unit is in standby mode for tape playback or recording.

WTape REC Lights during tape recording or recording standby mode.

ETape Counter display The tape counter value is incremented when the tape is moving from left to right, and decremented when it moves from right to left (See “Tape counter” on page 32 for more details).

RTape Level meter Displays the playback level and the input level of the source device for recording operation.

TTape, CD In the CD-TAPE CONT PLAY mode (continuous CD/tape playback), on of these will flash during playback.

YINPUT 2 This is always displayed except when recording with the PHONO key.

ULINE 2, DISC display Shows the different sources available for INPUT 2 (Tape deck).

line 2: a signal source is connected to line input 2.

disc: a signal source is connected to internal CD drive.

IDUB 1, 2 When dubbing a tape to a CD-RW, the indicator “dub 1” lights up. When dubbing a CD-RW to a tape, indicator “dub 2” lights up.

OCounter display Either TOTAL or REMAIN is lit. When both indictors are off, the time mode is set to show the elapsed time of the current track.

PDisc information display no toc Lights when a disc does not contain TOC (Table of Contents) data. CD, CD-R or CD-RW lights up when a disc with TOC data is loaded.

ACD play (¥) Lights during disc playback.

SCD pause (π) Lights during playback or recording standby mode.

DCD REC Lights during disc recording or recording standby mode.

FSYNC Lights when the SYNC recording mode is on.

GRepeat, A-B display When the Repeat function is on, “REPEAT” is lit. When the A-B Repeat function is on, “REPEAT” and “A-B” are lit. “A-B” also blinks until a “B-point” is entered.

HS I N G L E , R A N D O M , P R O G R A M d i s p l a y Depending on the playback mode selected. When all the indicators are off, Continuous playback mode is on.

JCharacter display Disc or track information, menu, message, time, and operation status are displayed.

KCD Level meter Displays the playback or input source level when recording.

LMUSIC CALENDER Available tracks for playback light up; played back tracks disappear from the screen. When there are more than 20 tracks available for playback, the “OVER” indicator lights up.

:A·Space Lights when the Auto Space function is on.

ZA·TRACK Lights when the Auto Track function is on. The indicator blinks when Time mode is select- ed.

XINPUT 1 This is always displayed except when recording with the PHONO key.

COPTICAL, COAXIAL, line 1, phono, tape display

Shows the different sources available for INPUT 1 (CD drive).

OPTICAL: Input source is connected to optical.

COAXIAL: Input source is connected to coaxial.

line 1: Input source is connected to line 1.

phono: Input source is connected to phono.

tape: Input source is connected to internal tape deck.

TASCAM CC-222MKIII 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents CC-222MK$ Important Safety Precautions Important Safety Instructions Optical pickup Safety InstructionsContents Introduction Supplied accessoriesRack-mounting the unit Some notes, precautions and environmental considerationsBeware of condensation Never use a stabilizer or printable discsHandling of compact discs About CD-R and CD-RW discsAbout tapes FinalizingAbout this manual Recordable discsBatteries Use of the remote control unitFront panel Features of the CC-222MK$Rear panel Display RC-222 Remote control unit Menu operation Menu configurationSimple playback operations Disc operationsTime display modes Track searchRandom playback Playback modesProgram playback Auto spacing Intro checkRepeat playback To B repeat playbackPlaying back MP3 files Directory playback settingRecording CDs Signal volumeInput selection Input monitoringTurn the Multi dial to set the value on or OFF Basic recordingTime display while recording Recording to disc from the Riaa Phono inputsPlaying back tracks Restricting the number of tracksDubbing to CD from the middle of the tape Dubbing from tape to discBypassing the Input level for dubbing Using the trigger level Setting the trigger levelAdvanced recording Synchronized recording Automatic track divisionManually divide track Rec mute function Fade-in and fade-outCopy-protection Erasing After recordingUnfinalizing CD-RW discs Erasing a whole disc Erasing tracksRefreshing a disc Playback operations Cassette operationsContinuous tape/CD playback Dubbing tapes from the CD deck Recording operationsDubbing to tape from the middle of a CD Recording tapes from the Phono deckOther tape functions and features Other recording featuresError messages Reference and specificationsMessages displayed during normal operation CD recorder section SpecificationsCassette recorder section Phono input and headphones Dimensional drawingGeneral specifications CC-222MK$
Top Page Image Contents