Tascam CC-222MK Recording to disc from the Riaa Phono inputs, Time display while recording

Page 22

5- Recording CDs

Time display while recording

During recording, three options are available for the time display modes.

When in record or record standby mode, repeated presses of the DISPLAY key cycles through display- ing the remaining time left for recording on the disc (total remain), the elapsed time of the track cur-

rently being recorded (no indicator lit) and the total time recorded on the disc (total).

NOTE

In record mode, REMAIN shows the same time dis- play as TOTAL REMAIN.

Playing back tracks

Although an unfinalized disc cannot be played back

MULTI DIAL control or the SKIP keys to select a

on an ordinary CD player, the CC-222MKIII can

track for playback.

play back tracks that have been recorded. Use the

 

Restricting the number of tracks

When making a recording, it is possible to restrict the number of tracks that may be recorded at one time.

At any time within record or record standby mode, turn the MULTI DIAL control or use the SKIP keys.

This sets the number of remaining tracks, as shown to the right of the time display.

The maximum number can be entered is 99 tracks

Every time a track division is made, the number shown at the right of the display goes down by one.

The number of remaining tracks can be changed during recording using the MULTI DIAL control.

Full disc

If the disc becomes full during recording, the unit will automatically insert a fade-out. For example:When recording a long program, just before the end of the disc is reached, the unit starts a fade-out over four seconds and the display will show Fade Out.

When the fade-out has finished, the display shows Disc Full!. Press the STOP key to exit.

If the disc is a CD-RW, the final track can be erased, if required (see “Erasing” on page 27) and the disc then finalized. If the disc is a CD-R, it must be finalized prior to use (see “Finalizing” on page 27).

Recording to disc from the RIAA PHONO inputs

NOTE

Because of the background noise often experi- enced when playing back analog vinyl recordings, the use of the following features is not recom- mended in the phono recording mode even though they are available: trigger level, sync recording and automatic track division.

To record to disc from an external record player con- nected to the RIAA PHONO input jacks:

1Load a recordable disc and put the unit in stop mode.

2Press the MENU key until the PHONO > XXX menu item is shown.

Turn the MULTI DIAL (or press the SKIP keys on the remote control) to select DISC. Prepare to play the record on the external record player.

3Press the PHONO key. The INPUT 1, PHONO indica- tor lights on the display, and the disc recorder enters record standby mode.

4Start playing back the record.

5Start recording on the disc by pressing the disc

PLAY key.

The level can be adjusted using the CD deck’s INPUT control.

Recording will stop when the recording time on the disc ends, or when the disc STOP key is pressed. Also, the RIAA PHONO input source will be canceled.

NOTE

Only the disc STOP key is enabled in this phono recording mode. The RECORD key therefore can- not be used for manual track increments (see

22 TASCAM CC-222MKIII

Page 21 Page 23
Image 22
Page 21 Page 23
Contents CC-222MK$ Important Safety Precautions Important Safety Instructions Safety Instructions Optical pickupContents Supplied accessories IntroductionBeware of condensation Some notes, precautions and environmental considerationsRack-mounting the unit Never use a stabilizer or printable discsAbout CD-R and CD-RW discs Handling of compact discsAbout this manual FinalizingAbout tapes Recordable discsUse of the remote control unit BatteriesFeatures of the CC-222MK$ Front panelRear panel Display RC-222 Remote control unit Menu configuration Menu operationTime display modes Disc operationsSimple playback operations Track searchRandom playback Playback modesProgram playback Repeat playback Intro checkAuto spacing To B repeat playbackDirectory playback setting Playing back MP3 filesInput selection Signal volumeRecording CDs Input monitoringBasic recording Turn the Multi dial to set the value on or OFFPlaying back tracks Recording to disc from the Riaa Phono inputsTime display while recording Restricting the number of tracksDubbing to CD from the middle of the tape Dubbing from tape to discBypassing the Input level for dubbing Using the trigger level Setting the trigger levelAdvanced recording Synchronized recording Automatic track divisionManually divide track Rec mute function Fade-in and fade-outCopy-protection Erasing After recordingUnfinalizing CD-RW discs Erasing a whole disc Erasing tracksRefreshing a disc Playback operations Cassette operationsContinuous tape/CD playback Recording operations Dubbing tapes from the CD deckRecording tapes from the Phono deck Dubbing to tape from the middle of a CDOther recording features Other tape functions and featuresError messages Reference and specificationsMessages displayed during normal operation CD recorder section SpecificationsCassette recorder section Phono input and headphones Dimensional drawingGeneral specifications CC-222MK$
Top Page Image Contents