RC-222 Remote control unit

2- Features of the CC-222MK$

		2
	1	3
	4	5
	4	6
		6
	7	8
	9	0
		q
	w	e
		t
	r	y
	i	o
	u	p
		a
	s	d
	f	j
	g	h
	k	z
	l	;

0Tape PLAY¥ key Starts tape playback or recording, from left to right.

qCONT PLAY key Use this key to turn continuous playback (alternating between disc and cassette) on and off.

wAUTO SPACE key Automatically adds a space of about four seconds between disc tracks on playback.

eDISPLAY key Changes the time display for the disc recording and playback.

rFADER key Use this key to perform automated fade-in and fade-out when recording to disc. The time is set using menu items.

tPLAY MODE key Allows the selection of either con- tinuos, single, programmed or random playback.

yINTRO CHECK key Allows the first 10 seconds of every track on a disc to be played.

uREPEAT key Sets the repeat mode (single track, or disc repeat playback) on and off.

iA-B key Use this key to set the start and end points of a repeat loop and to cancel such a loop.

oMENU key Repeated presses of this key shows dif- ferent menu items.

pENTER key Used to confirm menu settings.

aNumber keys (0 through 10, +10, and CLEAR key)

Use number keys to enter track numbers for disc

1Tape RESET key Resets the tape counter to zero.

2Tape RTZ key Returns the tape to the zero position.

3Disc OPEN/CLOSE key Opens and closes the disc tray.

4Tape ∆/˚ key Fast-rewinds or fast-forwards the tape. If the tape is already in playback mode, these act as the search keys.

5Tape REC MUTE key When recording to cassette and this key is pressed, the sound is muted for about four seconds, and the unit enters record standby mode.

6Tape REC key When stopped, pressing this key enters recording standby mode.

7Tape STOP key Stops the current tape transport operation.

8Tape PAUSE key Stands by for tape playback or recording. Pressing this key again resumes the opera- tion.

9Tape ˙PLAY key Starts tape playback or recording, from right to left.

playback.

The clear key cancels the last track entered.

sSEARCH Ô/ keys Used for “fast forward” and “fast reverse” through a disc.

dCD SKIP Â/¯ keys Used to select tracks or menu parameter values.

fCD REC key Places the disc in record standby mode and performs manual track incrementing while recording.

gCD REC MUTE key During disc recording, pressing this key inserts a silence of about four seconds and pauses recording.

hFINALIZE key Used when finalizing recordable discs.

jERASE key Used when erasing data from CD-RW discs.

kSYNC REC key Turns synchronized recording of the disc recorder on and off.

lCD STOP key Stops CD playback or disc recording.

;CD PAUSE key Pauses or resumes CD playback or recording (starts recording from record pause mode).

zCD PLAY key Starts CD playback or recording (from record standby mode).

14 TASCAM CC-222MKIII