Solving computer problems
Note: If you use the Fn+F7 key combination to apply a presentation scheme, press Fn+F7 at least three times in three seconds, and the image is displayed on the computer screen.
Problem:
The computer does not return from standby mode, or the standby indicator stays on and the computer does not work.
Solution:
If the system does not return from standby mode, it may have entered standby or hibernation mode automatically because the battery is depleted. Check the standby indicator.
vIf the standby indicator is on, your computer is in standby mode. Connect the ac adapter to the computer; then press Fn.
vIf the standby indicator is off, your computer is in hibernation mode or
If the system still does not return from standby mode, your system may stop responding and you cannot turn off the computer. In this case, you need to reset the computer. If you have not saved your data, it may be lost. To reset the computer, press and hold the power button for 4 seconds or more. If the system is still not reset, remove the ac adapter and the battery.
Problem:
Your computer does not enter standby or hibernation mode.
Solution:
Check whether any option has been selected that would disable your computer from entering standby or hibernation mode.
Problem:
The Fn+F12 key combination does not cause the computer to enter hibernation mode.
Solution:
The computer cannot enter hibernation mode. To enable hibernation mode, do as follows:
1.Start the ThinkPad Configuration Program.
2.Click Power Management.
3.Click the Hibernate tab.
4.Select the hibernate support checkbox.
5.Click OK.
Note: You can enter hibernation mode by pressing Fn+F12 only if the PM driver for Windows XP or Windows 2000 has been installed.
22ThinkPad® G40 Series Service and Troubleshooting Guide